Read Sharp LC-60UQ10KN (serv.man12) Technical Bulletin online
LCD 2014 05 01
Date of Issue:
2
nd
May 2013
Classification:
Yellow
LCD TELEVISION TECHNICAL BULLETIN
Page 5 of 8
Sharp Electronics (UK) Limited
Reference
– RG08072013-1
Revision - 3
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
Performing a USB update
1. Download and extract the UVP file from the Technical Website.
2. Copy the UVP file onto the root of a USB memory stick.
3. Turn on the AC power.
4. Insert the USB memory stick into a USB socket on the unit.
5. Use the Menu button and cursor keys on the remote control or on the set and navigate to -
2. Copy the UVP file onto the root of a USB memory stick.
3. Turn on the AC power.
4. Insert the USB memory stick into a USB socket on the unit.
5. Use the Menu button and cursor keys on the remote control or on the set and navigate to -
Setup - Information - Software update - USB update on OSD menu.
6. If a software update file is detected on the USB memory stick, the following screen shows up:
NOTE: If there is no software update file in the USB memory stick, a caution shows up.
"Please insert the correct file and retry software update."
NOTE: If the software update file in the USB memory stick is incorrect, a caution shows up.
"Please insert the correct file and retry software update."
NOTE: If the software update file in the USB memory stick is already installed, a caution shows up.
"Please reconfirm the software version and reinstall (if necessary)."
7. The software update starts.
Note
Note
– Do not disconnect the USB memory stick during this update.
Click on the first or last page to see other LC-60UQ10KN (serv.man12) service manuals if exist.