LC-60LE841E (serv.man9). Grey screen when changing between 3D and 2D - Sharp TV Technical Bulletin (repair manual). Page 3

Read Sharp LC-60LE841E (serv.man9) Technical Bulletin online

LCD 2012 10 03 
 
Date of Issue:       10
th
 October 2012 
         
Classification: 
White 
LCD TELEVISION TECHNICAL BULLETIN
 
Page 3 of 3 
 
 
Sharp Electronics (UK) Limited 
Reference – LV641
 
Revision  - 1 
 
White – Carry out as required 
Yellow – Carry out as required and whenever the unit comes in for service 
 Red – Carry out on all units   
 
 
9. After boot-up, the following caution shows up. 
Select OK when if there is no problem. 
Software update is completed, please remove the USB memory device. 
 
 
NOTE: 
Then get the set started and call the menu -> setup -> identification to 
check the main software version. 
 
CAUTION: 
1) Do not take out and put in the USB flash memory during upgrading. 
2) Do not turn off the AC power during upgrading. 
3) It takes about one minute to the rewriting completion. 
Please confirm the upgrade status on the screen becomes 100%. 
4) Wait for a further 20 seconds before turning off the AC power following the upgrade is completed 
message. 
Page of 3
Display

Download Sharp LC-60LE841E (serv.man9) Technical Bulletin