Read Sharp LC-46LE831E (serv.man15) Service Manual online
LC-40/46LE830E, RU/831E, S
5 – 7
8. Special features
1. NORMAL STANDBY CAUSE (Page 1/24)
Display of a cause (code) of the last standby.
The cause of the last standby is recorded in EEPROM whenever it is possible.
Checking this code will be useful in finding a problem when you repair the troubled set.
2. EEP SAVE (Page 24/24)
Storage of EEP adjustment value.
3. EEP RECOVER (Page 24/24)
Retrieval of EEP adjustment value from storage area.
4. MONITOR ERR CAUSE (Page 1/24)
Display of a cause (code) of Error from Monitor microcomputer.
The cause of Error is recorded in EEPROM whenever it is possible.
Checking this code will be useful in finding a problem when you repair the troubled set.
1) This displays Error code and time when the error occurred.
The latest error is displayed on “1)”.
The error that happens ahead of “1)” is displayed on “2)”.
2) The character depends on the way how to acquire Time Information.
Example) In this example, it is shown that the error occurred 3 times.
23/24
1
ERROR STANDBY CAUSE1
NO RECORD
ERROR STANDBY CAUSE
2
ERROR STANDBY CAUSE2
NO RECORD
3
ERROR STANDBY CAUSE3
NO RECORD
4
ERROR STANDBY CAUSE4
NO RECORD
5
ERROR STANDBY CAUSE5
NO RECORD
6
STANDBY CAUSE RESET
OFF
Reset stand by cause.
24/24
1
EEP SAVE
OFF
Writing setting values to EEPROM.
2
EEP RECOVER
OFF
Reading setting values from EEPROM.
3
MONITOR ERROR CAUSE RESET
OFF
Reset of monitor error cause
4
MODEL NAME
LE830E
MODEL NAME
5
PANEL SIZE
46
Panel size setting.
6
PANEL LIMIT
ON
PANEL LIMIT
7
PANEL RANGE LIMIT
xxx
PANEL RANGE LIMIT
8
SHORT CHECK MODE
Enter
Check LED Back light
9
SHORT CHECK CURRENT
60
10
CURRENT SW
LOW
11
PRODUCT EEP ADR
0x 0
Don’t touch when serving (for producer of factory)
12
PRODUCT EEP DATA
0x 0
Don’t touch when serving (for producer of factory)
13
PRODUCT FACTORY
1
Don’t touch when serving (for producer of factory)
T:
Time is acquired from digital broadcasting
This doesn’t contain “Time offset” which is considered a time difference and Daylight-Saving Time, etc. ...
This doesn’t contain “Time offset” which is considered a time difference and Daylight-Saving Time, etc. ...
U: Time is acquired from analog broadcasting (teletext)
B:
B:
Accumulation time of Backlight
In the case that Time information cannot be acquired, “B” is displayed.
In the case that Time information cannot be acquired, “B” is displayed.
1) 16 T07/01/01 12:03
Error code: 16 (lamp error)
Time: 07/01/01 12:03
* It is latest Error.
* Time is acquired from digital broadcasting.
* Time is UTC which doesn't have Time offset.
* Time is acquired from digital broadcasting.
* Time is UTC which doesn't have Time offset.
2) 16 U01/01/01 04:07
Error code: 16 (lamp error)
Time: 07/01/01 04:07
* It is Error that happens ahead of “1)”.
* Time is acquired from analogue broadcasting.
* Time is acquired from analogue broadcasting.
3) 16 B00000004:11
Error code: 16 (lamp error)
Accumulation time: It is displayed that 4:11 have passed after Backlight driving.
* It is Error that happens ahead of “2)”.
4) 00 0000000000000
No error (“00” shows that the error is not occurred.)
Page
Line
Item
Description
Remarks (adjustment detail, etc.)
Click on the first or last page to see other LC-46LE831E (serv.man15) service manuals if exist.