LC-46LE820E (serv.man10). Adjustment - Sharp TV Service Manual (repair manual). Page 11

LC-40/46/52LE820E, LC-40/46LU820E

6 – 11

2) Instantaneous current shutdown setting in turning off the power [SHUT DOWN MODE]

3) Volume maximum level [MAXIMUM VOLUME]

4) Volume fixed [VOLUME FIXED]

5) Volume fixed level [VOLUME FIXED LEVEL]

6) Remote control operation [RC BUTTON]

Option 

“NORMAL” or “QUICK”

Default NORMAL
Function

• This function decides whether scanning digital tuner is enabled or disabled when the power is standby.

 

NORMAL

: Scanning digital tuner is enabled when the power is standby.

QUICK

: Scanning digital tuner is disable 

It is possible to put into the standby state instantaneously due to power off input, when the 
power is standby.
Immediately, state is a complete standby. 

Remarks 

In selecting “QUICK”, the function does not work for the following items (selection impossible.)
• ON TIMER, QUICK START, DIGITAL FIXED, etc.

* These items does not exist according to the model.

Option

0~60 (loop disabled)

Default

60

Function

The volume cannot be increased more than the adjusted value (the main unit’s speaker only).

Remarks

• When setting to 59 or less, only the figure is displayed in the normal mode; the volume bar is not displayed.
• The volume of the headphones is limited. or monitor output 
• The setting is impossible when VOLUME FIXED is set to FIXED.

Option 

“VARIABLE”, “FIXED”, “ACCTRL” or “AC/RCCTRL” (loop enabled)

Default “VARIABLE”
Function 

• VARIABLE

: The volume is not fixed.

• FIXED

: The volume is fixed to the value adjusted in the volume fixed level.

• AC CTRL

: The unit starts at the volume specified in the volume fixed level, when power is turned on in 

the case of the AC-ON only.

• AC/RC CTRL

: The unit starts at the volume specified in the volume fixed level, when power is turned on in 

any case. (AC

→ON, remote control→ON, main unit's key→ON)

Exception 

• In the adjustment process, the volume can be set to any level regardless of this setting.

Disabled key when setting 
to FIXED

• VOLUME UP/DOWN    [both remote control and main unit]
• MUTE 

Remarks 

• [MAXIMUM VOLUME] has priority to [VOLUME FIXED]

* When setting to FIXED, Maximum volume is fixed.

• The volume of the headphones is fixed.
• When setting to “FIXED”, the volume is not displayed in operating Disabled key 
• In menu operation, the main unit's keys (Vol (+/-)) are enabled.

Option

0~60 (loop disabled)

Default

20

Function

The volume is fixed to the adjusted value (the main unit’s speaker only).

Exception

• In the adjustment process, the volume can be set to any level regardless of this setting.

Remarks

• When [VOLUME FIXED] is set to “VARIABLE”, the setting cannot be changed.

Option 

“RESPOND”, “NORESPOND” or “LIMITED” (loop enabled)

Default “RESPOND”
Function

The operation of the remote control’s keys is set.

 

   RESPOND

: the remote control’s keys in the normal state are enabled.

   NO RESPOND

: the remote control’s keys in the normal state are disabled.

The POWER key (RECEPTION/STANDBY key) is also disabled.

   LIMITED 

: only a part of keys (CHANNEL, etc.) is enabled and other keys are disabled.

Exception 

• In the adjustment process mode, inspection mode are enabled regardless of this setting.
• All the keys are enabled regardless of this setting while entering the adjustment process mode, inspection mode 

or Public Mode setting screen.

Remarks 

The enable keys when setting to “LIMITED” are depended on keys of controler for Public.
It is different according to Model.