Read Sharp LC-46DH77E (serv.man4) Service Manual online
LC-42DH77E/RU/S/V, LC-46DH77E/RU/S/V
3 – 15
13. Upgrading the software
1. Turn off the AC power (Unplug the AC power cord).
2. Insert the upgrading USB flash memory for upgrade into the service slot.
3. While holding down the power button, plug in the AC power cord of the main unit to turn on the power.
4. Upgrade begins automatically.
After the set starts, the upgrade screen like the figure below is displayed.
5. If any of the procedures fails, the following upgrade failure screen shows up. For the failing procedure, the “NG” marking turns red.
NOTE: In such case, try to upgrade the software again. If it still fails, the hardware may be in trouble.
6. When all the procedures are complete, the following upgrade success screen shows up. The new software version can be confirmed on screen.
The version number appears when each item has been successfully upgraded. Finally the main version number appears on screen.
<S Y S T EM U P G R A D E>
System Version: E0708021
B A N K 1
B A N K 2
B A N K 3
S T A T U S
U P D A T IN G . . .
U P D A T IN G . . .
30%
0%
0%
<S Y S T EM U P G R A D E>
System Version: E0708021
B A N K 1
O K
B A N K 2
O K
B A N K 3
S T A T U S
U P D A T IN G . . .
U P D A T IN G . . .
100%
100%
44%
<S Y S T EM U P G R A D E>
System Version: E0708021
B A N K 1
O K
B A N K 2
O K
B A N K 3
S T A T U S
O K
U P G R A D E C O M P LET E
100%
100%
100%
Click on the first or last page to see other LC-46DH77E (serv.man4) service manuals if exist.