Read Sharp LC-46DH77E (serv.man4) Service Manual online
LC-42DH77E/RU/S/V, LC-46DH77E/RU/S/V
3 – 12
9. Video signal adjustment procedure
The adjustment process mode menu is listed in Section 5.
Signal generator level adjustment check (Adjustment to the specified level)
1. Entering the adjustment process mode
Enter the adjustment process mode according to Section 2.
2. PAL signal adjustment
CAUTION: When going on “PAL signal adjustment” of 2 item after all adjustment completion, please be sure to put “TUNER adjustment” of 3 item into
effect after it.
3. TUNER adjustment
4. SECAM adjustment
• Composite signal PAL
: 0.7Vp-p
± 0.02Vp-p (Pedestal to white level)
• RGB signal
: 0.7Vp-p
± 0.02Vp-p
• 15K component signal (50 Hz) : Y level
: 0.7Vp-p
± 0.02Vp-p (Pedestal to white level)
: PB, PR level
: 0.7Vp-p
± 0.02Vp-p
• 33K component signal
: Y level
: 0.7Vp-p
± 0.02Vp-p (Pedestal to white level)
: PB, PR level
: 0.7Vp-p
± 0.02Vp-p
Adjustment point
Adjustment Conditions
Adjustment procedure
1
Setting
[Signal]
PAL
Full Field Colour Bar composite
signal
PAL
Full Field Colour Bar composite
signal
[Terminal]
EXT1 SCART IN
EXT1 SCART IN
• Feed the PAL full field colour bar signal (75% colour saturation) to EXT1
SCART IN.
2
Auto adjustment
performance
performance
Page 4/16
Bring the cursor on [PAL ADJ] and press [OK] [PAL ADJ OK] appears when fin-
ished.
ished.
Adjustment point
Adjustment Conditions
Adjustment procedure
1
Setting
[Signal]
PAL
Split Field Colour Bar RF signal
U/V
PAL
Split Field Colour Bar RF signal
U/V
[Terminal]
TUNER
TUNER
• Feed the PAL Split Field colour bar signal (E-12ch) to TUNER.
• Make sure the PAL colour bar pattern has the sync level of 7:3 with the pic-
• Make sure the PAL colour bar pattern has the sync level of 7:3 with the pic-
ture level.
Signal level: 55 dB
µV ± 1dB (75Ω LOAD)
2
Auto adjustment
performance
performance
Page 3/16
Bring the cursor on [TUNER ADJ] and press [OK]
[TUNER ADJ OK] appears when finished.
[TUNER ADJ OK] appears when finished.
Adjustment point
Adjustment Conditions
Adjustment procedure
1
Setting
[Signal]
SECAM
Full Field Colour Bar signal
SECAM
Full Field Colour Bar signal
[Terminal]
EXT1 SCART IN
EXT1 SCART IN
• Feed the SECAM full field colour bar signal (75% colour saturation) to EXT1
SCART IN.
2
Auto adjustment
performance
performance
Page 4/16
Bring the cursor on [SECAM ADJ] and press [OK] [SECAM ADJ OK] appears
when finished.
when finished.
100% white
[VIDEO in signal]
100% white
[E-12CH]
100% white
Click on the first or last page to see other LC-46DH77E (serv.man4) service manuals if exist.