Read Sharp LC-45GD1E (serv.man47) User Guide / Operation Manual online
63
Using external equipment
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• When connecting to a PC, the correct input signal type is automatically detected.
• When connecting to a PC, the correct input signal type is automatically detected.
(See page 71.) If the PC image does not come in clearly, you may need to set the
Auto Sync. adjustment in the “Setup” menu. (See page 65.)
Auto Sync. adjustment in the “Setup” menu. (See page 65.)
Connecting a PC
Use the INPUT5 terminals to connect a PC.
NOTE
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 79 for a list of PC signals compatible with the System.
• Refer to page 79 for a list of PC signals compatible with the System.
AVC System (rear view)
ø 3.5 mm stereo minijack cable
(commercially available)
(commercially available)
PC
ø 3.5 mm stereo minijack cable
(commercially available)
(commercially available)
RGB/DVI conversion cable
(commercially available)
(commercially available)
DVI cable
(commercially available)
(commercially available)
To watch the image from this
input terminal, you may
select input source (see
page 59) and input signal
type (see page 66).
input terminal, you may
select input source (see
page 59) and input signal
type (see page 66).
PC
To optical digital input of external audio devices
Optical fibre cable
Using Digital Audio Output
It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal.
PCM audio outputs from the terminal.
PCM audio outputs from the terminal.
LC-45GD1E(E)-i
04.9.27, 10:20 AM
63
Click on the first or last page to see other LC-45GD1E (serv.man47) service manuals if exist.