LC-45GD1E (serv.man47). Using memory card, Using external equipment, Useful adjustment settings - Sharp TV User Guide / Operation Manual. Page 11

SCART cable
(commercially available)

You can use the INPUT 1 terminal when connecting a decoder and other audiovisual equipment.

• In cases when the decoder needs to receive signal from the System, make sure to set “Decoder” to “INPUT1” in the

Programme Setup “Manual Adjust” menu. (See page 29.)

SCART cable (commercially available)

SCART cable
(commercially available)

You can use the INPUT 2 terminal when connecting a VCR and other audiovisual equipment.
If your VCR supports TV-VCR advanced “AV Link” systems (see page 61), you can connect the VCR to the
INPUT 2 terminal on the AVC System using the fully-wired SCART cable.

• TV-VCR advanced “AV Link” systems may not be compatible with some external sources.
• It is recommended to connect to the INPUT 2 terminal when using a decoder for ground wave signal input with a VCR. If

INPUT 2 signals preset in auto installation or programme setup, make sure to set “Decoder” to “INPUT2” in the Programme
Setup “Manual Adjust” menu. (See page 29.)

To watch an image from this input terminal, you
may select the input source (see page 59) and
the input signal type (see page 66).

To watch an image from this input terminal, you
may select the input source (see page 59) and
the input signal type (see page 66).

LC-45GD1E(E)-i

04.9.27, 10:20 AM

60