Read Sharp LC-40LE631E Service Manual online
2. Service Alignment Mode (SAM) (Continued)
Changing the display option via a standard RC: Key in the code “062598” directly followed by the “MENU” (or
“HOME”) button and “XXX” (where XXX is the 3 digit decimal display code as mentioned on the below table).
Make sure to key in all three digits, also the leading zero’s. If the above action is successful, the front LED will go out as
an indication that the RC sequence was correct. After the display option is changed in the NVM, the TV will go to the
Stand-by mode. If the NVM was corrupted or empty before this action, it will be initialized first (loaded with default values).
This initializing can take up to 20 seconds.
How to Navigate
• In SAM, the menu items can be selected with the “CURSOR-DOWN/UP/LEFT/RIGHT” knob of the RC transmitter.
•
•
Store - go right. All options and alignments are stored when pressing “cursor right” (or the “OK” button) and then the
“OK”-button.
•
•
Operation hours display. Displays the accumulated total of operation hours of the screen itself. In case of a display
replacement, reset to “0” or to the consumed operation hours of the spare display.
Issued by:
CE After Sales Service
July 2011
Service Mode
Click on the first or last page to see other LC-40LE631E service manuals if exist.