Read Sharp LC-40LE631E Service Manual online
1. Service Default Mode (SDM) (Continued)
How to Activate SDM
For this chassis there are two kinds of SDM:
an analogue SDM and a digital SDM. Tuning will happen according
Table 5-1.
•
•
Analogue SDM: use the standard RC-transmitter and key in the code “062596”, directly followed by the “MENU”
(or “HOME”) button.
You need to input these digits within 5 seconds or it will not work. If it does not work, recommend
turning the set off / on (AC)
Note: It is possible that, together with the SDM, the main menu will appear. To switch it “off”, push the “MENU”
(or “HOME”) button again.
Analogue SDM can also be activated by grounding for a moment the solder path on the SSB, with the indication “SDM”
Analogue SDM can also be activated by grounding for a moment the solder path on the SSB, with the indication “SDM”
(see Service mode pad).
•
•
Digital SDM: use the standard RC-transmitter and key in the code “062593”, directly followed by the “MENU”
(or “HOME”) button.
"SDM" appears in the top right of the screen
Note: It is possible that, together with the SDM, the main menu will appear. To switch it “off”, push the “MENU”
(or “HOME”) button again
Issued by:
CE After Sales Service
July 2011
Service Mode
Click on the first or last page to see other LC-40LE631E service manuals if exist.