Read Sharp LC-40F22E Service Manual online
1. TUNER(TU102)
A horizontal mounted and Digital Half-Nim tuner is used in the product, which covers 3 Bands(From
48MHz to 862MHz for COFDM, from 45.25MHz to 863.25MHz for CCIR CH). The tuning is available
through the digitally controlled I2C bus (PLL). Below you will find info about the tuner.
48MHz to 862MHz for COFDM, from 45.25MHz to 863.25MHz for CCIR CH). The tuning is available
through the digitally controlled I2C bus (PLL). Below you will find info about the tuner.
In active antenna option, the following circuit are used. ANT_CTRL pin is controlled by
microcontroller. If ANT_CTRL is low, ANT_PWR will be low. If ANT_CTRL is high, ANT_PWR will be
high.
microcontroller. If ANT_CTRL is low, ANT_PWR will be low. If ANT_CTRL is high, ANT_PWR will be
high.
OVER_CUR_DETECT pin is a monitor for short circuit in antenna. OVER_CUR_DETECT is low,
ANT_CTRL will be low, so ANT_PWR will be low. Finally, short circuit protection is done by circuits
and microcontroller.
ANT_CTRL will be low, so ANT_PWR will be low. Finally, short circuit protection is done by circuits
and microcontroller.
1.1. General description of Samsung DTOS403LH121B:
The Tuner covers 3 Bands(from 48MHz to 862MHz for COFDM, from 45.25MHz to 863.25MHz for
CCIR CH). Band selection and Tuning are performed digitally via the I2C bus.
CCIR CH). Band selection and Tuning are performed digitally via the I2C bus.
1.2. Features of DTOS403LH121B:
Receiving System: This TUNER is designed to cover the air channels in VHF and UHF,
compliant with DVB-T standard. and It covers all Analog channels from 48.25MHz to
863.25MHz
863.25MHz
Receiving Channel (Digital, Center frequency):
VHF Low CH. E2 ~ S10 ( 50.5MHz ~ 170.5MHz )
VHF High CH. E5 ~ S41 ( 177.5MHz ~ 466 MHz )
VHF High CH. E5 ~ S41 ( 177.5MHz ~ 466 MHz )
Click on the first or last page to see other LC-40F22E service manuals if exist.