Read Sharp LC-37P50E Handy Guide online
Firmware Upgrade Procedure
Version 1.1
Issue 06/2006
Issue 06/2006
30
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
6.
Result appears at the end of the process.
When the rewriting has succeeded, the status pane appears green as shown above.
When failed, it appears red.
(If failed, start over the rewriting process. If it still fails, the hardware may be
damaged.)
When failed, it appears red.
(If failed, start over the rewriting process. If it still fails, the hardware may be
damaged.)
7.
When rewriting is complete, the Power LED flashes.
8.
When finished, turn off AC power (unplug AC adapter) of the unit and disconnect the
rewriting jig.
rewriting jig.
9.
The software is updated.
(After rewriting the software, turn on the unit and check the Main Software version on
the initial page of process adjustment.)
(After rewriting the software, turn on the unit and check the Main Software version on
the initial page of process adjustment.)
Click on the first or last page to see other LC-37P50E service manuals if exist.