Read Sharp LC-37P50E Handy Guide online
Firmware Upgrade Procedure
Version 1.1
Issue 06/2006
Issue 06/2006
28
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
If either error (see below) appears, press "OK" to proceed. These errors indicate that the
program file to write data cannot be found. All that is required is to select the program file
following the instructions below.
program file to write data cannot be found. All that is required is to select the program file
following the instructions below.
After startup, select the software file to rewrite so that IAPwriter can read. Click File and then
LOAD on the IAPwriter toolbar, or click the "Load FILE" icon to select the file.
LOAD on the IAPwriter toolbar, or click the "Load FILE" icon to select the file.
2.
Selecting the Source File
The following window appears after clicking the Load FILE icon. Select the source file
and click [Open].
The following window appears after clicking the Load FILE icon. Select the source file
and click [Open].
3.
File Type
The following window appears. Click [OK] without changing the settings.
The default settings are as follows (do not change them under normal circumstances):
File Type:
The default settings are as follows (do not change them under normal circumstances):
File Type:
Binary
Buffer Address: 0x0
File Address: 0x130000
File Address: 0x130000
Click on the first or last page to see other LC-37P50E service manuals if exist.