Read Sharp LC-37GD1E (serv.man26) User Guide / Operation Manual online
56
Using memory card
Recording a still image
You can record a still image on the card.
Press E.
1
2
Press d.
3
Press OK to update the
still image.
still image.
Onion
Tomato
Potato
x 1
x 1
x 1
Still
Cooking Time
Onion
Tomato
Potato
x 1
x 1
x 1
Cooking Time
Still
Still image was captured on a card.
Still
Cooking Time
Cooking Time
• “Still image was captured on a card.” displays.
• Recording may fail depending on the input
• Recording may fail depending on the input
signal type or card memory status.
NOTE
Broadcasting types or input signals not available for
recording:
1 DTV broadcasting
recording:
1 DTV broadcasting
4 Copy guarded signal
2 COMPONENT input
5 DVI-I input
3 RGB input
Ejecting the card
• Make sure the card indicator lights up green.
Press EJECT button.
• EJECT button is popped up.
1
2
Press EJECT button again.
• PC card adapter itself pops up.
EJECT button
3
Take out the PC card adapter.
Inserting a PC card adapter
• Press in the EJECT button if it is popped out.
• Insert a memory card to a PC card adapter
• Insert a memory card to a PC card adapter
beforehand. (See page 54.)
• Insert the PC adapter card slowly.
• CARD indicator lights up green when the card is
inserted.
PC CARD slot
CARD indicator
NOTE
• When “Card is not inserted” is displayed, eject the PC
card adapter, and then insert the PC card adapter slowly
all the way to the end.
all the way to the end.
• When over a thousand files are in a card, it takes several
minutes to load. (approx. 5 minutes.)
• Even if the green light is on, you can not record on a card
right after you inserted it.
• Make sure the CARD indicator lights green when you take
out a card. Never take out a card when the CARD indicator
lights red. This may damage the card.
lights red. This may damage the card.
Cooking Time
LC-32GD1E(E)-g
04.4.6, 1:46 PM
56
Click on the first or last page to see other LC-37GD1E (serv.man26) service manuals if exist.