Read Sharp LC-37GD1E (serv.man26) User Guide / Operation Manual online
60
Using memory card
Recording a motion picture
Use this setting to record images you are currently
watching.
Record with the settings made in “Rec. Mode” and
“Pre-recording”.
watching.
Record with the settings made in “Rec. Mode” and
“Pre-recording”.
Press E to start recording.
• CARD indicator lights up red.
• Recording information displays in the lower
• Recording information displays in the lower
right corner of the screen.
1
2
Press E to stop recording.
To display the remaining record time.
Press p while not recording.
• Remaining record time displays in the lower right corner
of the screen.
NOTE
• Do not press X on the display while recording. Recording
cannot finish properly and may damage the file.
• Recording stops if you press B on the remote control
while recording.
• When card has no capacity for recording, “Card is full”
displays and stops recording.
• You cannot change the channel or switch the input source
while recording.
Displaying a motion picture
Press CARD and the card mode screen
displays.
displays.
1
2
Press c/d to select “Video”, and then press
OK.
OK.
3
Press a/b/c/d to select the file you want
to play, and then press OK.
to play, and then press OK.
• Video playback starts.
4
Press CARD again to display the operation
panel.
panel.
• See page 55 for the operation panel
information.
• When viewing a motion picture, by pressing f
the picture size changes.
Small – Medium – Large.
Small – Medium – Large.
NOTE
Broadcasting types or input signals not available for
recording:
1 DTV broadcasting
2 COMPONENT input
3 RGB input
4 Copy guarded signal
5 DVI-I input
recording:
1 DTV broadcasting
2 COMPONENT input
3 RGB input
4 Copy guarded signal
5 DVI-I input
Rec. Mode
Use this setting for recording images you are currently
watching. You can select the recording mode (picture
quality) for a motion picture.
watching. You can select the recording mode (picture
quality) for a motion picture.
5
6
Press a/b to select “Rec. Mode”, and then
press OK.
press OK.
Press MENU and the MENU screen displays.
2
3
Press c/d to select “Card”.
4
Press a/b to select “Video Setup” and then
press OK.
press OK.
Rec. Mode
Pre-recording
Repeat
Edit
SP
LP
EP
Press a/b to select the desired mode, and
then press OK.
then press OK.
Press CARD and the card mode screen
displays.
displays.
1
CARD - VIDEO
PLAY
Play
Mode : SP
0 0 : 1 5 : 2 5
0001/0045
REPEAT:OFF
Selecting Video mode
Press CARD and the card mode screen
displays.
displays.
1
2
Press c/d to select “Video”, and then press
OK.
OK.
• When in CARD mode, press 0-9 or b to
switch either TV or AV input mode.
LC-32GD1E(E)-g
04.4.6, 1:46 PM
60
Click on the first or last page to see other LC-37GD1E (serv.man26) service manuals if exist.