LC-37GA5E (serv.man5). Software Updating - Sharp TV Service Manual (repair manual). Page 2

Access to folder:
-

D:\SOFTWARE UPDATE GA5\Installation order VCTi\2

-

Install LPT driver SETUP_LPTDRVDEV_V0202_XP_20.EXE

Use for Windows 95/98:       Setup_LptDrv_v0104_9x.exe
Use for Windows 2000/XP:   Setup_LptDrv_v0202_XP_20.exe
Use for Windows NT:           Setup_LptDrv_v0104_NT.exe

After installing VI2C, the new generated file structure should look like this:
—> Micronas
        |—> LptDrv   (in case of parallel port driver installed!)
        |—> Visual I2C
               |—> dal
               |—> doc
               |—> Port_Driver
-

Check installation of LPT driver:

C:\Program Files\Micronas\LptDrv\LptDrvTest.exe

If the LPT Driver is OK, the next picture shows:

If this test is not OK, check in your BIOS: Parallel Port Mode = EPP

How to use the application
-To start VCTi software updater program, you can create direct access to:
 C:\Program Files\Micronas\Visual I2C\VCT49xyi\vcth_tvt_16bit.vi2c
-Run direct access «vcth_tvt_16bit.vi2c».

Access to folder:
-D:\SOFTWARE UPDATE GA5\Installation order VCTi\VCT49xyi
-Copy all the content to the folder C:\Program Files\Micronas\Visual I2C and after selecting all files and directories
and change the «Read only» property. (When you copy from CD, the files are read only protected)

Check your installation:
-When you finish this process the Visual I2C is ready for Win2000 and XP
-LptDriver V.2.2.0 and VctiDown.exe V 1.3  are installed.

-If you have Win98 is necessary change version VctiDown.exe.
-Extract C:\Program Files\Micronas\Visual I2C\VCT49xyi\download\VctiDown_v1-2.zip in the same folder.
-Check LptDriver V1.4.0 and VctiDown.exe V1.2 are installed (Win98).