Read Sharp LC-37D65 Handy Guide online
Firmware Upgrade Procedure
Version 1.0
Issue 07/2010
13
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
6. When all the procedures are complete, the following upgrade success screen shows
up. The new software version can be confirmed on screen.
The version number appears when each item has been successfully upgraded. Finally
the main version number appears on screen.
The version number appears when each item has been successfully upgraded. Finally
the main version number appears on screen.
7. Turn off the AC power (Unplug the AC power cord). Take out the upgrading USB flash
memory.
It waits for about 20 seconds until the AC power supply is turned off.
It waits for about 20 seconds until the AC power supply is turned off.
8. Now the software has been upgraded.
NOTE: Then get the set started and call the process adjustment screen 1/16 to
check the main software version.
check the main software version.
CAUTION:
1) Do not take out and put in the USB flash memory during formatting.
2) It takes about one minute to the rewriting completion.
Please confirm the upgrade status on the screen becomes 100%.
3) The AC power supply of the set is waited for about 20 seconds until off (The
AC outlet is pulled out) after the upgrade is completed.
1) Do not take out and put in the USB flash memory during formatting.
2) It takes about one minute to the rewriting completion.
Please confirm the upgrade status on the screen becomes 100%.
3) The AC power supply of the set is waited for about 20 seconds until off (The
AC outlet is pulled out) after the upgrade is completed.
Click on the first or last page to see other LC-37D65 service manuals if exist.