Read Sharp LC-37D65 Handy Guide online
Firmware Upgrade Procedure
Version 1.0
Issue 07/2010
12
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Firmware Upgrade Procedure
Part Number
Description
Price Rank
Commercially Available
USB Pen Drive 32MB - 1GB
N/A
1. Turn off the AC power (Unplug the AC power cord).
2. Insert the upgrading USB flash memory for upgrade into the service slot.
3. While holding down the power button, plug in the AC power cord of the main unit to
2. Insert the upgrading USB flash memory for upgrade into the service slot.
3. While holding down the power button, plug in the AC power cord of the main unit to
turn on the power.
4. Upgrade begins automatically.
After the set starts, the upgrade screen like the figure below is displayed.
5. If any of the procedures fails, the following upgrade failure screen shows up. For the
failing procedure, the “NG” marking turns red.
NOTE: In such case, try to upgrade the software again. If it still fails, the
hardware may be in trouble.
hardware may be in trouble.
Click on the first or last page to see other LC-37D65 service manuals if exist.