Read Sharp LC-37AD1E (serv.man8) Service Manual online
29
LC-37AD1E
2) Digital white balance adjustment
(1) PAL signal adjustment
(1) PAL signal adjustment
Item
Adjusting conditions
Adjusting procedure
1
Setting
PAL R cutoff
1. Press "1" on the remote controller in the process
adjustment mode.
2. Adjust "PAL R CUTOFF" so that the luminance level of
the window pattern is maximized.
20% white window pattern
~
It is recommended that a
pattern without chroma and
burst be used.
burst be used.
3
2
4
PAL G cutoff
PAL B cutoff
5
PAL R drive
6
PAL G drive
7
PAL B drive
80% white window pattern
~
It is recommended that a
pattern without chroma and
burst be used.
burst be used.
1. Provide the adjusting N358 signal (adjustment conditions) to the video image input pin of
video input 1. Page: 7
1. Press "2" on the remote controller in the process
adjustment mode.
2. Adjust "PAL G CUTOFF" so that the luminance level of
the window pattern is maximized.
1. Press "3" on the remote controller in the process
adjustment mode.
2. Adjust "PAL B CUTOFF" so that the luminance level of
the window pattern is maximized.
1. Press "4" on the remote controller in the process
adjustment mode.
2. Adjust "PAL R DRIVE" so that the luminance level of the
window pattern is maximized.
1. Press "5" on the remote controller in the process
adjustment mode.
2. Adjust "PAL G DRIVE" so that the luminance level of
the window pattern is maximized.
1. Press "6" on the remote controller in the process
adjustment mode.
2. Adjust "PAL B DRIVE" so that the luminance level of the
window pattern is maximized.
8
Convergence
Repeat the above adjustments until convergence is reached (Adjust cutoff, drive, cutoff, drive and so on.)
(2) NTSC signal adjustment
Item
Adjusting conditions
Adjusting procedure
1
Setting
N358 R cutoff
1. Press "1" on the remote controller in the process
adjustment mode.
2. Adjust "N358 R CUTOFF" so that the luminance level of
the window pattern is maximized.
20% white window pattern
~
It is recommended that a
pattern without chroma and
burst be used.
burst be used.
3
2
4
N358 G cutoff
N358 B cutoff
5
N358 R drive
6
N358 G drive
7
N358 B drive
80% white window pattern
~
It is recommended that a
pattern without chroma and
burst be used.
burst be used.
1. Provide the adjusting N358 signal (adjustment conditions) to the video image input pin of
video input 1. Page: 8
1. Press "2" on the remote controller in the process
adjustment mode.
2. Adjust "N358 G CUTOFF" so that the luminance level of
the window pattern is maximized.
1. Press "3" on the remote controller in the process
adjustment mode.
2. Adjust "N358 B CUTOFF" so that the luminance level of
the window pattern is maximized.
1. Press "4" on the remote controller in the process
adjustment mode.
2. Adjust "N358 R DRIVE" so that the luminance level of
the window pattern is maximized.
1. Press "5" on the remote controller in the process
adjustment mode.
2. Adjust "N358 G DRIVE" so that the luminance level of
the window pattern is maximized.
1. Press "6" on the remote controller in the process
adjustment mode.
2. Adjust "N358 B DRIVE" so that the luminance level of
the window pattern is maximized.
8
Convergence
Repeat the above adjustments until convergence is reached (Adjust cutoff, drive, cutoff, drive and so on.)
Click on the first or last page to see other LC-37AD1E (serv.man8) service manuals if exist.