LC-32XL8E (serv.man3). Adjustment Procedure - Sharp TV Service Manual (repair manual). Page 7

LC-32XL8E/S/RU, LC-37XL8E/S/RU

3 – 7

4. Operation after “RESET”

Select “RESET” in the PUBLIC Mode, and it operates as follows when it is executed (refer to the basic operation).

• The set contents in the PUBLIC mode are initialized.

• It does not exit the PUBLIC mode.

• If not executed, the reset contents are not reflected.

• If “EXCUTE” is not executed, the content that does RESET is not reflected.

5. Setting items (* Item names and selective items are expressed in English.)

1) Power ON fixed [POWER ON FIXED] 

If the power button is pressed in the ordinary mode when set to “FIXED_ALL”, the caution is displayed for 5 seconds.

       When power button on the main unit is pressed                             When power button on R/C is pressed

Option

“VARIABLE”, “FIXED_ALL”, “FIXED_BODYKEY” or “RC RESPOND” (loop enabled)

Default

“VARIABLE”

Function

• When set to “FIXED_ALL”, the “POWER/RECEPTION” key on the main unit or remote control is disabled.

However, the power can be turned off using the “MAIN POWER” switch.

• For some models, the (MAIN) POWER switch is also disabled.
• When set to “FIXED_BODYKEY”, only the “MAIN POWER” key on the main unit is disabled (the remote control is 

enabled).

• When selecting “RC RESPOND”, the main unit’s POWER switch toggles between ON and Standby (the same 

operation as the remote control).

Key disabled when set 
other than default

• OFF TIMER (SLEEP)

Remarks

When selecting to “FIXED_ALL”, it functions with the correspondence which isn’t done about other standby factors 
(see below).
• No operation OFF
• No signal OFF (including the power management)

No Power off by power button.

No Power off by remote control.