Read Sharp LC-32WD1E Service Manual online
5 - 2
LC-32WD1E/S/RU and LC-32WT1E
[1.3] Analogue Upgrade
[1.3.1] Analogue Upgrade Software Setup
Refer to “File types and Hardware/Software Requirements” on page 5-1.
1.
Install telos_multimaster_setup-2_0.exe.
2.
Install FlashFlame 4.1.exe.
3.
If necessary, download and install Microsoft .NET Framework 1.1. (This is typically included in most Windows installations.)
4.
To verify the installation is correct, open ServUpdtTelos_v1_8.exe. The application should open with no errors. Close the
application.
application.
[1.3.2]
Analogue Upgrade Hardware Setup
1.
On the Service PCB, install the jumper to shortcut the X2 jumper position.
2.
Connect the Service PCB to the TV by the DB9 connector. (Refer to “Television rear and side view” on page 2-1.)
3.
Connect the MiniDIN cable to the Service PCB. Connect the other end of the MiniDIN cable to the Telos device.
4.
Connect the USB cable to the Telos device. (Do not connect the other end of the USB cable to the TV at this time.)
Jumper
MiniDIN cable
Telos device
USB cable
Service PCB
To controlling PC
(later step)
(later step)
Click on the first or last page to see other LC-32WD1E service manuals if exist.