LC-32P70E (serv.man39) - Sharp TV User Guide / Operation Manual. Page 31

With the Electronic Programme Guide (EPG), you can
check the schedule of DTV and Radio events, view
detailed information about them, tune to an event
currently on-air and set a timer for future events.

Page l

Page k

Press EPG.

• Pressing RADIO will switch between DTV and Radio

mode.

Press a/b/c/d to access the desired service
or event.

• The image shown in the picture window changes.

1 Press a/b to scroll the page up/down. Or,

2 Press RED (Page l) or GREEN (Page k) to

skip to the previous/next page in one step.

1 Press c/d to scroll the page left/right. Or,

2 Press  YELLOW (Prev. Day) or BLUE (Next

Day) to skip to the previous/next day in one
step.

When the Timer is set, the TV automatically tunes to a
preset TV event when its on-air time begins.

Press EPG.

Press  a/b/c/d to select the desired event to
be preset from the Event name list, and then press
OK (OK/Timer).

• Select an event not yet started.

Press RED (Timer Mode), and then press a/b
to select the desired parameter (“Once”, “Daily”,
“Weekly”, or “Monthly”), and then press OK.

• Once set, the preset event is indicated with an

orange background in the EPG event name list.

• If using this function for recording, make sure to set the

timer of your recording equipment as well.

• Do not switch channels while recording using this function.
• This function cannot be set for locked services or when

Child Lock applies. (See pages 24 and 27.)

• Up to 8 events can be preset using the Timer function.
• If the TV is in standby mode when the preset on-air time

nears, it will output signals for recording without image
displayed on the screen.

• If you are watching another event, an alarm message

displays on the screen a few seconds before the preset
time.

• To cancel the preset, select the event to delete, press

GREEN (Delete Timer), press c/d to select “Yes”, and
then press OK.

• An alert message displays when the preset events overlap

one another.

• The TV power may not come on for several seconds if

you preset an event using the EPG Timer and if the AC
cord has been disconnected.

• Once you preset an event using the EPG Timer, in DTV,

and then press B on the remote control to enter the
standby mode, the power consumption will be higher than
normal (about 20W) until the programmed event is
broadcast. When pressing a on the TV to turn off the
power, the power consumption will be same as normal
standby consumption (about 0.9W), and the EPG Timer
will not be in operation.

1

2

3

4

• Shows the list of all services currently available. As

you scroll down the list, the rows in the Event name
list on the right will be refreshed correspondingly.

5

• Shows the names of current events in a grid of rows

and columns. You can check scheduled event
information up to several days ahead, depending
on conditions.

To watch an event currently on-air, press OK (OK/
Timer).

• The TV will show the image in full screen.
• Selecting an event that has not yet started will

activate the EPG Timer mode instead.

• Pressing  p opens the EPG Description screen that

provides more information about the selected event. Press
p or END to exit.

1

2

4

5

3

LC-26P70E_GB_e

06.5.2, 6:41 AM

29