LC-32P50E. Version 1.1 - Sharp TV Handy Guide. Page 37

37

Adjustment gradation values (IN) appear on page 9/12 of process adjustment, and
adjustment initial values (OUT) appear on pages 10/12 and 11/12. For white balance
adjustment, adjust the OUT values on pages 10/12 and 11/12.

[Condition of the unit for inspection] Modulated light: MAX (+8)

[Adjustment reference device] Minolta CA-210

[Adjustment]

Check that the values on page 9/12 of process adjustment are set as below. If not, change
them accordingly.

1) Display the current adjustment status at point 6. (Press the ”6” button on the remote control
to toggle between normal display and adjustment status display [normal display - ”6” -
adjustment status display - ”6” - normal display - ...].)

2) Check the brightness values using the luminance meter.

3) Change M GAMMA R6, M GAMMA G6 and M GAMMA B6 on page 11/12 of process
adjustment so that the brightness becomes closest to x=0.272 and y=0.277.

4) Repeat step 1) to check the values. Repeat the steps until the brightness becomes closest
to x=0.272 and

5) Set M GAMMA G1, M GAMMA G2, M GAMMA G3, M GAMMA G4 and M GAMMA G5
according to the following formulae.