Read Sharp LC-32LD166K (serv.man7) Technical Bulletin online
LCD 2014 09 02
Date of Issue:11
th
September 2014
Classification:
White
LCD TELEVISION TECHNICAL BULLETIN
Page 2 of 2
Sharp Electronics (UK) Limited
Reference
– RG11092017-1
Revision - 1
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
Reported Issues
Issue
No radio stations are found.
Cause
This is a unique issue which only affects units with special ATV firmware installed.
When you switch from DTV to ATV back to DTV, at this point only the DTV channels
are available.
This is not a fault and is how the unit is designed.
This is a unique issue which only affects units with special ATV firmware installed.
When you switch from DTV to ATV back to DTV, at this point only the DTV channels
are available.
This is not a fault and is how the unit is designed.
Solution
To resolve the issue:
• When in DTV mode, press the “PR LIST” button on the remote control.
• With the menu on display, press the “RED” button on the remote.
• You can now select the radio channels.
You will have to carry out this sequence every time you switch between DTV and ATV
and want to use the radio.
As the firmware is not supported, Sharp cannot request any improvement to the
feature.
To resolve the issue:
• When in DTV mode, press the “PR LIST” button on the remote control.
• With the menu on display, press the “RED” button on the remote.
• You can now select the radio channels.
You will have to carry out this sequence every time you switch between DTV and ATV
and want to use the radio.
As the firmware is not supported, Sharp cannot request any improvement to the
feature.
Display
397.jpg "View the file")
652.jpg "View the file")
273.jpg "View the file")
