Read Sharp LC-32LD166K (serv.man4) User Guide / Operation Manual online
12 -
Appendix
Troubleshooting
Problem
Possible Solution
No picture
1� Connect power cord correctly�
2� Turn on power�
3� Connect signal cable correctly�
4� Press any button on the LCD TV�
2� Turn on power�
3� Connect signal cable correctly�
4� Press any button on the LCD TV�
Abnormal colours
Connect signal cable correctly�
Twisted picture
1� Connect signal cable correctly�
2� Please use compatible signal�
2� Please use compatible signal�
Picture too dark
Adjust brightness and contrast�
Audio only, no images
1� Please check if input signal is connected correctly�
2� TV-RF signal must not be lower than 50dB�
2� TV-RF signal must not be lower than 50dB�
Picture only, no audio
1� Connect signal cable correctly�
2� Adjust volume to proper level�
3� Connect audio signal cable correctly�
4� TV-RF signal must not be lower than 50dB�
2� Adjust volume to proper level�
3� Connect audio signal cable correctly�
4� TV-RF signal must not be lower than 50dB�
Cannot use remote control
1� Please change battery�
2� Turn off power for 10 seconds; and then restart power�
2� Turn off power for 10 seconds; and then restart power�
Cannot receive sufficient channels
through antenna
Please use the Channel Scan function to increase the number of channels not
included in memory�
No colour
Please adjust the colour setup�
Blinking picture accompanied by ghost
image
1� Check the connection of antenna/signal cable�
2� Check if channel is in play mode�
3� Press signal source and change input mode�
2� Check if channel is in play mode�
3� Press signal source and change input mode�
Broken lines or segments
Adjust antenna�
Keep the TV away from noise sources, such as automobiles, neon lights, and
Keep the TV away from noise sources, such as automobiles, neon lights, and
hair dryers�
Certain TV channels are blocked (Hope
to acquire some channels)
Please use the Update Scan method to add the channels not included in
memory�
Overlapping images or ghost images
Please use multi-directional outdoor antenna�
(If your TV is subject to the influence of nearby mountains or buildings)�
(If your TV is subject to the influence of nearby mountains or buildings)�
Cannot use a function
If the item you choose turns gray, that item cannot be selected�
Cannot receive programmes
Please use the Update Scan method to add the channels not included in
memory�
Environmental specifications
Item
32”
42”
46”
50”
*1 On-Mode (W)
Standard
40W
68W
69W
83W
*2 Energy-Save-Mode (W)
Eco > On
32W
54W
55W
67W
*3 Standby-Mode (W)
0�26W
0�28W
0�28W
0�28W
*4 Annual Energy Consumption (kWh)
58kWh
99kWh
101kWh
121kWh
*5 Annual Energy Consumption (kWh)
(Energy-Save-Mode)
Eco > On
46�8kWh
79kWh
81kWh
98kWh
6 Energy Classification
Class A
Class A
Class A
Class A
*1 Measured according to IEC 62087 Ed� 2 / Ed� 3
*2 For further information about the Energy Save function, please see related pages in this operation manual
*3 Measured according to EN 50564: 2011
*4 Annual energy consumption is calculated on the basis of the On-Mode (Standard) power consumption, watching TV 4
*2 For further information about the Energy Save function, please see related pages in this operation manual
*3 Measured according to EN 50564: 2011
*4 Annual energy consumption is calculated on the basis of the On-Mode (Standard) power consumption, watching TV 4
hours a day, 365 days a year
*5 Annual energy consumption is calculated on the basis of the Energy-Save-Mode power consumption, watching TV 4
hours a day, 365 days a year�
NOTE
• The power consumption of On-Mode varies depending on the images the TV displays�
• The power consumption of On-Mode varies depending on the images the TV displays�
Click on the first or last page to see other LC-32LD166K (serv.man4) service manuals if exist.