LC-32LD166K (serv.man4) - Sharp TV User Guide / Operation Manual. Page 11

Select 

Auto to detect IP automatically, or select Manual 

to enter 

IP Address, Netmask, Gateway, Primary DNS, 

and 

Secondary DNS�

* 

* 

* 

* 

* 

E

Check if the TV connects to network successfully or 
not�

When you get the software updating news from the 
retailer or internet, you can update the operation 
software using the 

OAD (Over Air Download)� The 

updated software data will be transferred through the 
TV signal�

NOTE
•  Please do not switch off the TV during the downloading 

process�

You can use this function to save energy�

E

When set to “

On”,  you can turn the screen off and 

enjoy audio only�

E

When set to “

On”, the TV will decrease the power 

consumption and increase the backlight lifespan�

E

Allows the TV to automatically enter standby mode 
when there is no operation� 

Select the time to 

1 Hour /  

2 Hours / 4 Hours. Or select Off to disable this function�

NOTE
•  5 minutes before the TV enters standby mode, the 

remaining 

time is displayed every minute�

This function enables you to control the HDMI-CEC 
compliant device connected via the HDMI connector�

Select 

Store or Home� Store mode is recommended 

for displaying in a retail showroom, and Home mode 
is recommended for normal home using for energy 
saving�

You can label each input source (except 

USB) with a 

custom description�

When set to “

On”, the LED on the front of the TV turns 

on� 

Displays  the Software information�

When you activate the 

Reset, the TV enters to first 

time installation�

Lock TV channels or connected devices with a 
four-digit code to prevent children from watching 
unauthorized content�
You have to enter a 4-digit password every time to 
access 

Parental menu�

Enter “

0000” as the default password�

Lock TV channels to prevent children from watching 
certain channels�

NOTE
•  If you switch to the locked channel, you will be 

prompted to enter your password� (If your password is 
correct, the locked channel will be unlocked before the 
TV restarts from standby�)

Some digital broadcasters rate their programmes 
according to age� You can set TV to display only 
programmes with age ratings higher than your child’s�

Enter your new password in the 

New Password box 

by using the 

digit buttons on the remote control� 

Then, enter your new password again in the 

Password box�

Reset all the settings in the 

Parental menu�