Read Sharp LC-32GD7E (serv.man5) User Guide / Operation Manual online
32
Assignment of digital audio in- and outputs
Audio input “AUDIO DIGITAL IN”
The TV set has a coaxial digital audio input “AUDIO DIGITAL IN” and a
coaxial digital audio output “AUDIO DIGITAL OUT”. If you are using an
external digital surround amplifi er for sound reproduction, you have to
feed digital audio signals to the TV, e.g. from the DVD player.
S-VIDEO OUT
DIG OUT
REAR
MAINS
L
R
(CVBS)
(Y/C)
VIDEO OUT
AUDIO
STEREO OUT
VIDEO OUT
I
AUX-
I/O
II
TO TV-
I/O
OPT OUT
RIGHT
SUBW.
REAR
RIGHT
FRONT
FRONT
LEFT
CENTER
MULTICHANNEL AUDIO OUT
DIGITAL AUDIO OUT
PCM/MPEG2/AC3/DTS
LEFT
FRONT
FRONT
PREOUT
FR
FL
SL SR
SUB
C
L
L
R
R
AUX1 IN
DIGITAL
IN
DIGITAL
OUT
AUX OUT
AUX 2
AV2
AUDIO DIGITAL
IN OUT
DVD
Surround Amplifier
Connect the output socket of the DVD player (DIG OUT) to the TV’s
“AUDIO DIGITAL IN” socket with a cinch cable.
In the connection wizard you specify that sound transmission is to be
digital. Specify that the digital sound is to be assigned for example to the
Euro AV socket 2 to pass on the digital sound to the digital audio output
of the TV set and via this to the external audio amplifi er. Further informa-
tion about this can be found on page 33.
Digital audio output
The digital audio signal is applied at the “AUDIO DIGITAL OUT” socket of
the TV. For example, you can connect an external digital audio amplifi er
here.
An analogue audio signal from the TV set or another sound source which
is received at one of the Euro-AV sockets of the TV set is converted into
a digital signal (PCM) and output at the “AUDIO DIGITAL OUT” socket.
Conversion from external analogue AV sources to PCM is not possible
if the loudspeaker of the TV set is used as a centre channel. In this case
connect your audio amplifi er additionally to the TV (AUDIO OUT L/R)
connect your audio amplifi er additionally to the TV (AUDIO OUT L/R)
with a cinch cable and switch the audio amplifi er to analogue audio input.
The digital TV sound or the digital sound of a connected auxiliary device
is only audible via an external digital audio amplifi er.
Sound selection
If you are receiving a digital TV programme with several sound formats,
you can call up the menu “Language/Sound selection” by pressing the
END button. Press the green button after this.
If you have connected an external Dolby Digital decoder and have entered
this in the connection wizard, you should now select “Dolby Digital”.
Note: The sound outputs of the TV set and speakers do not emit any
Note: The sound outputs of the TV set and speakers do not emit any
sound signals in this operating mode (Exception: the TV speakers are
used as active centre channel).
Only Stereo/PCM is reproduced with the setting “Sound via TV”. This
Only Stereo/PCM is reproduced with the setting “Sound via TV”. This
must be considered when selecting the sound.
Operating additional equipment
Click on the first or last page to see other LC-32GD7E (serv.man5) service manuals if exist.