Read Sharp LC-32GD7E (serv.man5) User Guide / Operation Manual online
30
Login and connect equipment
You have logged in and connected all connected equipment in the initial
start-up. If you want to connect other equipment or disconnect equip-
ment, call the connection wizard.
Call up the TV menu
Select “Connections”
Select “New devices/modifi cations” and
call up with OK.
State what equipment you want to connect. The connection wizard then
shows you which sockets you should connect this equipment to. Then
connect the equipment to these sockets.
Connecting VCR/DVD recorders
In addition to the connection via the Euro-AV sockets you also have to
connect the antenna (only for terrrestrial antenna or cable systems)
through the VCR/DVD recorder to the TV set. The antenna signal is then
available to the VCR/DVD recorder and the TV set.
Note: Use Euro AV cables with right-angled plugs as shown.
ENTREE
ANTENNE
EURO AV2
DECODER
DECODER
EURO AV1
AUDIO/
VIDEO
SORTIE
ANTENNE
AERIAL
RF OUT
SORTIE
G
L
D
R
OUT
AUDIO
Search for and store the station of the video recorder (if no Euro AV
cable is available)
Switch on the test station on the VCR or insert a recorded tape and start
playback. In some video recorders the station must be switched on by
activating the modulator.
Then call the AV selection on the TV set with
or with button 0. Select
the menu item “VIDEO” in the AV selection and call with OK.
To prevent “normal” TV stations being found in the search, pull out the
antenna plug from the antenna input of the VCR temporarily (the cable to
the antenna system).
If you cannot see the test station or playback from the cassette, the VCR
is transmitting on a different station. You then have to search for the
station or set it manually.
Call the TV menu with the MENU button.
Select “Setup” with
Select “Setup” with
.
Select “Stations” with and press OK.
Select “Manual tune” with and press OK.
Enter station “E30” under the “Channel” item (UHF range, select in this
Select “Manual tune” with and press OK.
Enter station “E30” under the “Channel” item (UHF range, select in this
menu above if necessary).
Start search with the blue button.
If the station has been found, enter the name “VIDEO”, confi rm with
Start search with the blue button.
If the station has been found, enter the name “VIDEO”, confi rm with
OK and save with the red button.
A list of the stored stations is displayed
Select AV here and overwrite this programme place with the red but-
A list of the stored stations is displayed
Select AV here and overwrite this programme place with the red but-
ton.
Hide the menu with the END button.
Hide the menu with the END button.
Reconnect the antenna plug back in.
If you now get interference because a TV station is transmitting on the
same channel as the VCR station, you have to change the transmitting
station on the VCR and repeat the steps 1 ... 10.
1.
2.
3.
4.
5.
2.
3.
4.
5.
6.
7.
7.
8.
9.
9.
10.
Operating additional equipment
Click on the first or last page to see other LC-32GD7E (serv.man5) service manuals if exist.