LC-32CT2E (serv.man3) - Sharp TV User Guide / Operation Manual. Page 23

English   - 23 -

If the signal is weak or absent, the TV will automatically 
change to a blue screen. To enable this, set Blue 
Background to On.
By pressing “ ” or “ ” button, select Blue 
Background. Press “ ” or “ ” button  to set Blue 
Background as On or Off.

Press “ ” or “ ” button to select Menu Background. 
You can set menu background level by pressing 
“ ” or “ ” button.

This setting controls the backlight level. Select 
Backlight by pressing “

” or “

” button. 

Press“ ” or “ ” button to set Backlight to Auto, 
Medium, Maximum or Minimum.

To set a specifi c display timeout for menu screens, 
set a value for this option.
Press “ ” or “ ” button to select Menu Timeout. Use 
“ ” or “ ” button to change menu timeout to 15 sec, 
30 sec or 60 sec.

Press “ ” or “ ” button to select Teletext Language. 
Use “ ” or “ ” button to change Teletext Language to 
West, East, Cyrillic, Turk/Gre, Arabic or Persian. 

If you want to view PC screen in HDMI mode by using 
external connection, HDMI PC FULL MODE option 
should be On to adjust the screen ratio correctly. This 
item might be inactive in some resolutions.

If you connect a device via HDMI or YPbPr connectors 
and set 1080i/1080P resolutions, Full Mode item will 
be visible.You can set Full Mode as 1:1 or Normal 
by using “ ” or “ ”.If you select 1:1, screen ratio will 
be adjusted correctly. If you set Normal, screen ratio 
may expand. 

Press “ ” or “ ” button to select Ext Out. Use “ ” or 
“ ” button to set the Ext Out as On or Off.

Press “ ” or “ ” button to select Program. Use  “ ” 
or “ ” button to select the program number. You can 
also enter a number using the numeric buttons on the 
remote control. There are 200 programme storage 
between 0 and 199.

Band can be selected either C or S. Press “ ” or 
“ ” button to set Band. 

Channel can be changed by “ ” or “ ” button or 
numeric buttons.

Press “ ” or “ ”  button to select Colour System. 
Use “ ” or “ ” button to change the colour system to 
AUTO, PAL, SECAM or PAL60.

Press “ ” or “ ” button to select  Sound System.  
Press “ ” or “ ” button to change the sound system 
to BG,DK, I, L or L’.

Press “ ” or “ ” button to select Fine Tune. Press “

” or “ ” button to adjust the tuning.

Press “ ” or “ ” button to select Search. Use  “ ” 
or “ ” button to start programme searching. You can 
also enter the desired frequency using the numeric 
buttons while Search item is highlighted.

Press “ ” or “ ” button to select Store. Press “ ” 
or OK button to store the settings. “Stored...” will be 
displayed on the screen.

The following screen appears in the install menu when 
the TV is in AV modes. Note that limited options will 

A01_MB38_[GB]_3920UK_IDTV-T2_GOLD7_32883W_10067516_50164256_(V004).indd   23

A01_MB38_[GB]_3920UK_IDTV-T2_GOLD7_32883W_10067516_50164256_(V004).indd   23

25.03.2010   10:36:14

25.03.2010   10:36:14