LC-32CT2E (serv.man3) - Sharp TV User Guide / Operation Manual. Page 22

English   - 22 -

Press “ ” or “ ” button to select Headphone. Press 
“ ” button to view the headphone menu.
Headphone sub-menu options are described below:

Press “ ” or “ ” button to select Volume. Press “
” button to increase headphone volume level. Press 
“ ” button to decrease headphone volume level. 
Headphone volume level can be adjusted between 
0 and 63.

Press “ ” or “ ” button to select Sound Mode. Using 
“ ” or “ ” button, you can select Mono, Stereo, Dual I 
or Dual II mode, only if the selected channel supports 
that mode.

Automatic Volume Limiting (AVL) function adjusts the 
sound to obtain fi xed output level between programmes 
(For instance, volume level of advertisements tend to 
be louder than programmes).
Press “ ” or “ ” button to select AVL. Press “ ” or 
“ ” button  to set the AVL as On or Off.

Press “ ” or “ ”” button to select Spdif Out . Press “

” or “ ” button to set the Spdif Out as On or Off .

If you are watching a mono broadcast, set Effect on to 
obtain a better sound effect which will be more stereo-
like. If the current sound system is stereo, switching 
this effect on will give a more spatial effect.
Press “ ” or “ ” button to select Effect. Press  “ ” 
or “ ” button  to set as On or Off .

Press “ ” or “ ” button to select Store. Press “ ” 
or OK button to store the settings. “Stored...” will be 
displayed on the screen.

Press “ ” or “ ” button to select Sleep Timer. Use 
“ ” or “ ” button to set the Sleep Timer.
The timer can be programmed between Off and 2 
hours (120 minutes) in steps of 10 minutes.
If Sleep Timer is activated, at the end of the selected 
time, the TV goes automatically to standby mode.

Press “ ” or “ ” button to select Child Lock.
Use “ ” or “ ” button  to set the Child Lock On or Off. 
When On is selected, the TV can only be controlled 
by the remote control. In this case the control panel 
buttons will not work, except for the Standby/On 
button. When Child Lock is activated you are able to 
switch the TV into Standby mode with the Standby/
On button. To switch the TV on again, you need the 
remote control. In this case the control panel buttons 
(except for the STANDBY button) will not work. Hence, 
if one of those buttons is pressed, Child Lock Is On 
will be displayed on the screen when the menu screen 
is not visible.

Press “ ” or “ ” button to select Language. Use “
” or “ ” button to select the Language. 

While zoom mode is set as AUTO, the TV will set 
the zoom mode in accordance with the  signal of 
the broadcast. If there is no WSS or aspect ratio 
information, the TV will then use this setting to adopt. 
Press “ ” or “ ” button to select Default Zoom. You 
can set Default Zoom to 16:9, 4:3, Panoramic or
14:9 by pressing “ ” or “ ” button.

A01_MB38_[GB]_3920UK_IDTV-T2_GOLD7_32883W_10067516_50164256_(V004).indd   22

A01_MB38_[GB]_3920UK_IDTV-T2_GOLD7_32883W_10067516_50164256_(V004).indd   22

25.03.2010   10:36:13

25.03.2010   10:36:13