Read Sharp LC-30HV2E (serv.man17) User Guide / Operation Manual online
12
Watching TV
Display
AVC System
Off
Flashing red
Red
Green
Display status indicator
Power off
AVC System does not turn on or its AC cord is disconnected.
The System is in standby mode.
The System turns the power on.
AVC System status indicator
Power off
Only the AVC System is in standby mode or the System is in standby mode.
The System turns the power on.
Turning on the power
1
Press MAIN POWER on the Display.
• The STANDBY/ON indicator on the Display flashes red.
2
Press POWER on the AVC System.
• The System turns the power on.
• The STANDBY/ON indicator on the Display lights up green and
• The STANDBY/ON indicator on the Display lights up green and
the one on the AVC System lights up green.
• If the STANDBY/ON indicators still light up red, press B on
the remote control unit or STANDBY/ON button on the Display
to turn the System on.
to turn the System on.
When turning the AVC System on first
1
Press POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System lights up red.
2
Press MAIN POWER on the Display.
• The System turns the power on.
• The STANDBY/ON indicator on the Display lights up green and
• The STANDBY/ON indicator on the Display lights up green and
the one on the AVC System lights up green.
• If the STANDBY/ON indicators still light up red, press B on
the remote control unit or STANDBY/ON button on the Display
to turn the System on.
to turn the System on.
A
• “System” above means the Display and AVC System.
• The initial auto installation starts when the System powers on for the first
• “System” above means the Display and AVC System.
• The initial auto installation starts when the System powers on for the first
time. If the System has been turned on before, the initial auto installation
will not be invoked. See page 21 to try auto installation from the Setup
menu.
will not be invoked. See page 21 to try auto installation from the Setup
menu.
Turning off the power
1
Press B on the remote control unit or STANDBY/ON button
on the Display.
on the Display.
• The System enters standby mode and the image on the screen
disappears.
• Both STANDBY/ON indicators change from green to red.
2
Press POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System turns off and
the one on the Display flashes red.
3
Press MAIN POWER on the Display.
• The STANDBY/ON indicator on the Display turns off after
approximately 5 seconds.
A
• If you are not going to use this System for a long time, be sure to remove
• If you are not going to use this System for a long time, be sure to remove
the AC cord from the power outlet.
Off
Red
Green
STANDBY/ON indicator
POWER
MAIN POWER
STANDBY/ON indicator
STANDBY/ON button
Click on the first or last page to see other LC-30HV2E (serv.man17) service manuals if exist.