LC-30HV2E (serv.man17). Watching TV - Sharp TV User Guide / Operation Manual

lc-30hv2e (serv.man17) user guide / operation manual
Model
LC-30HV2E (serv.man17)
Pages
9
Size
647.16 KB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
TV / LCD / Watching TV
File
lc-30hv2e-sm17.pdf
Date

Read Sharp LC-30HV2E (serv.man17) User Guide / Operation Manual online

10
Watching TV
P
B
(C
B
)
COMPONENT
P
R
(C
R
)
Y
R - AUDIO - L
INPUT 3
INPUT 2
INPUT 1
RS-232C
DISPLAY OUTPUT1
DISPLAY OUTPUT2
AC INPUT
220–240V
AV OUTPUT
S-VIDEO
VIDEO
AC INPUT
110V–240V
DISPLAY INPUT2
DISPLAY INPUT1
P
B
(C
B
)
COMPONENT
P
R
(C
R
)
Y
R - AUDIO - L
INPUT 3
INPUT 2
INPUT 1
RS-232C
DISPLAY OUTPUT1
DISPLAY OUTPUT2
AC INPUT
220–240V
AV OUTPUT
S-VIDEO
VIDEO
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round
cable) (commercially available)
Simple operations for watching a TV programme
Basic connection
Connecting to an antenna
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections
that are used for coaxial cable.
Antenna cables-commercially available
If your outdoor antenna uses a 75-ohm coaxial cable with a standard DIN45325
plug (IEC 169-2), plug it into the ANTENNA INPUT terminal at the rear of the
AVC System.
Connecting to the power outlet
Display (rear view)
AVC System (rear view)
A
• Always turn off the main power of Display and AVC System when connecting the AC cords.
• Disconnect the AC cord from the AC outlet, Display and AVC System when the System is not going to be used long
period of time.
Product shape varies
in some countries
Product shape varies
in some countries
11
Watching TV
Using Headphones
You can use any pair of headphones (3.5 mm ø mini-jack) to listen to the sound.
AC INPUT
110V–240V
DISPLAY INPUT2
DISPLAY INPUT1
 Headphones (3.5 mm ø mini-jack)
(commercially available)
A
• When connecting headphones, the sound from the display speakers is muted.
12
Watching TV
Display
AVC System
Off
Flashing red
Red
Green
Display status indicator
Power off
AVC System does not turn on or its AC cord is disconnected.
The System is in standby mode.
The System turns the power on.
AVC System status indicator
Power off
Only the AVC System is in standby mode or the System is in standby mode.
The System turns the power on.
Turning on the power
1
Press MAIN POWER on the Display.
• The STANDBY/ON indicator on the Display flashes red.
2
Press POWER on the AVC System.
• The System turns the power on.
• The STANDBY/ON indicator on the Display lights up green and
the one on the AVC System lights up green.
• If the STANDBY/ON indicators still light up red, press B on
the remote control unit or STANDBY/ON button on the Display
to turn the System on.
When turning the AVC System on first
1
Press POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System lights up red.
2
Press MAIN POWER on the Display.
• The System turns the power on.
• The STANDBY/ON indicator on the Display lights up green and
the one on the AVC System lights up green.
• If the STANDBY/ON indicators still light up red, press B on
the remote control unit or STANDBY/ON button on the Display
to turn the System on.
A
• “System” above means the Display and AVC System.
• The initial auto installation starts when the System powers on for the first
time. If the System has been turned on before, the initial auto installation
will not be invoked. See page 21 to try auto installation from the Setup
menu.
Turning off the power
1
Press B on the remote control unit or STANDBY/ON button
on the Display.
• The System enters standby mode and the image on the screen
disappears.
• Both STANDBY/ON indicators change from green to red.
2
Press POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System turns off and
the one on the Display flashes red.
3
Press MAIN POWER on the Display.
• The STANDBY/ON indicator on the Display turns off after
approximately 5 seconds.
A
• If you are not going to use this System for a long time, be sure to remove
the AC cord from the power outlet.
Off
Red
Green
STANDBY/ON indicator
POWER
MAIN POWER
STANDBY/ON indicator
STANDBY/ON button
13
Language menu
Country menu
Auto Installation - Language
English
Deutsch
Français
Italiano
Español
Nederlands
Svenska
Português
Türkçe
Suomi
Auto Installation - Country
Austria
Belgium
Denmark
B/G
B/G
B/G
A
B
DK
1.
Setting the on-screen display language
1 Press  a/b to select the desired language listed
on the screen.
2 Press ENTER to enter the setting.
2.
Setting the country or area
1 Press a/b to select your country or area listed on
the screen.
2 Press ENTER to enter the setting.
• The programme auto search starts at the same time.
A
• Return to the Language menu by pressing RETURN.
Searching TV  channels
Auto Installation - Setup “Auto”
01
02
55.25
85.25
03
102.25
04
05
06
07
08
09
10
11
142.25
148.25
Initial auto installation
When the System powers on for the first time after purchase, the initial auto installation is invoked. You can
automatically set language, country and channels in successive operations.
A
• See page 21 to try Auto installation from the setup menu.
3.
Automatic channel searching
Channel auto search makes the System look for all
channels viewable in the set country or area.
A
• If no channel is found, “No programme found. Is antenna
connected properly?” displays. And the auto installation
is finished.
• If you want to try Auto installation again, see page 21.
Watching TV
ENTER
RETURN
/
Page of 9
Display

Download Sharp LC-30HV2E (serv.man17) User Guide / Operation Manual

Here you can read online and download Sharp LC-30HV2E (serv.man17) User Guide / Operation Manual in PDF. LC-30HV2E (serv.man17) user guide / operation manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp LC-30HV2E (serv.man17) LCD. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.