Read Sharp LC-26GA5E (serv.man3) User Guide / Operation Manual online
27
• Is the AC cord disconnected? (See page 3.)
• Has the power been turned on? (See page 7.)
• Make sure the a (Power) switch of the TV is set to ON.
• Has the power been turned on? (See page 7.)
• Make sure the a (Power) switch of the TV is set to ON.
• External influences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after first turning the power off, or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
• Are batteries inserted with polarity (e, f) aligned? (See page 4.)
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated to remote control sensor?
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated to remote control sensor?
• Adjust the picture levels. (See page 9.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the system setting. (See page 19.)
• Check the input type setting. (See page 21.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the system setting. (See page 19.)
• Check the input type setting. (See page 21.)
• The unit’s internal temperature has increased.
Remove any objects blocking vent or clean.
• Check the power control setting. (See page 21.)
• Is connection to other components correct? (See pages 22 and 23.)
• Has input type setup been done correctly after connection? (See page 21.)
• Is the correct input selected? (See page 21.)
• Is a non-compatible signal being input? (See page 24.)
• Is picture adjustment correct? (See pages 9 and 10.)
• Is the antenna connected properly? (See page 3.)
• Has input type setup been done correctly after connection? (See page 21.)
• Is the correct input selected? (See page 21.)
• Is a non-compatible signal being input? (See page 24.)
• Is picture adjustment correct? (See pages 9 and 10.)
• Is the antenna connected properly? (See page 3.)
• Is the volume too low? (See page 5.)
• Make sure that headphones are not connected. (See page 6.)
• Make sure the sound is not set to Mute.
• Make sure that headphones are not connected. (See page 6.)
• Make sure the sound is not set to Mute.
Troubleshooting
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near
a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: –20°C to +60°C (–4°F to +140°F).
Storage temperature: –20°C to +60°C (–4°F to +140°F).
Appendix
Problem
Possible Solution
• No power.
• Unit cannot be operated.
• Remote control unit does not
operate.
• Strange colour, light colour, or
dark, or colour misalignment.
• Power is suddenly turned off.
• No picture.
• No sound.
LC-26/32/37GA5E(E)_c
04.11.30, 8:28 AM
27
Click on the first or last page to see other LC-26GA5E (serv.man3) service manuals if exist.