LC-26GA5E (serv.man3). s - Sharp TV User Guide / Operation Manual. Page 27

You can select the display size by pressing f on the
remote control.

• “WIDE MODES” cannot be set when the FM radio mode

is selected.

E

Press  f to display the “WIDE MODES” menu
screen.

Press a/b to select “WIDE MODES”. And then
select your desired screen size format among
“NORMAL 4:3”, “CINEMA”, “ZOOM 14:9”,
“PANORAMA”, “FULL” or “AUTO” by pressing
c/d.

NORMAL 4:3: For 4:3 “standard” pictures. A side

bar appears on each side.

CINEMA: For 16:9 broadcast cinema movies, etc.

Bars may appear on the top and bottom with some
programmes.

ZOOM 14:9: A thin side bar appears on each side,

and you may also see bars on the top and bottom
with some programmes.

PANORAMA: In this mode the picture is

progressively stretched toward each side of the
screen.

FULL: For 16:9 squeeze pictures.
AUTO: In this mode the screen size changes

automatically.

When you select “CINEMA”, “ZOOM 14:9” or
“PANORAMA”, you can change the vertical “SIZE” and
vertical “POSITION”.

Perform 1 and 2 described on the left to select
“CINEMA”, “ZOOM 14:9” or “PANORAMA”.

Press a/b to select “SIZE” or “POSITION”. The
“SIZE” or “POSITION” indicator will be displayed.

Press c/d to adjust the item to your desired size
and position.

Press  OK if you wish to normalize the vertical
“SIZE” or vertical “POSITION”.

Press END to exit.

E

Some broadcasting station send the WSS signal with
information of original screen size. When the TV is in
“AUTO” mode and receives the WSS signal, it changes
the screen size automatically.

Press  f on the remote control to display the
“WIDE MODES” screen.

Press a/b to select “WIDE MODES”.  And then
select “AUTO” by pressing c/d.

You can make adjustments for FM radio broadcasting
by using RADIO on the remote control.

Press RADIO to display the RADIO MENU screen.

Press a/b to select the preset radio channel.

Press c/d to adjust the volume.

Press END to exit the MENU screen.

And you can also add a new radio channel or change
the preset channel settings by pressing OK.

You can display the TUNE mode by pressing Red.

• When you are watching the TV through the external

sources (EXT1 or EXT2), and it receives information
of 16:9 format (through the audio-video control pin)
the TV selects “FULL” automatically.

• In order for the “AUTO” to function correctly, the

“WSS” item must be set “ON” in the “GENERAL
SETUP” menu. To check it, see page 21.

WSS code 16:9

CINEMA

WSS code 14:9

ZOOM 14:9

WSS code

PANORAMA

LC-26/32/37GA5E(E)_c

04.11.30, 8:28 AM

25