LC-26AD5E - Sharp TV Service Manual (repair manual). Page 17

Before UPDATE the Digital Soft Firmware, it is necessary to install the WRITING TOOLS into the PC.
For the installation of WRITING TOOL, refer to the "INSTALLING FOR WRITING TOOLS".

Unplug the AC cord, and remove the back cabinet.

Using the Serial Communication Change JIG (JG198) and RS232 Cable, connect the PC terminal and UART
Connector(CP2402) on the DIGITAL PCB Ass'y.

Connect it in order of Digital Pcb       Serial Communication Change JIG(JG198)        RS232 Cable       PC.

Insert the AC cord, turn on the power.

Press both VOLUME DOWN button on the set and Channel button (2) on the remote control for 2 seconds.
Confirm that displayed software version.

Set the Standby mode.

Set the DTV ROM DISC(JG176) to PC.

1.

2.

3.

4.

5.

6.

Serial Communication Change JIG(JG198)

RS232 Cable

TO PC

TO DIGITAL PCB

UART Connector(CP2402)