LC-24DV250K (serv.man5) - Sharp TV User Guide / Operation Manual. Page 14

Read Sharp LC-24DV250K (serv.man5) User Guide / Operation Manual online

English   - 13 -
Note: Lip Sync delay may occur during the timeshifting. 
Radio record is supported. The TV can record 
programmes up to ten hours.
Recorded programmes are split into 4GB partitions. 
If the writing speed of the connected USB disk is not 
suffi cient, the recording may fail and the timeshifting 
feature may not be available.
It is recommended to use USB hard disk drives for 
recording HD programmes.
Do not plug out the USB/HDD during a recording. This 
may harm the connected USB/HDD.
Multipartition support is available. The maximum of 
two different partitions are supported. The fi rst partition 
of the USB disk is used for PVR ready features. It also 
must be formatted as the primary partition to be used 
for the PVR ready features.
Some stream packets may not be recorded because 
of signal problems, so sometimes video may freezes 
during playback. 
Record, Play, Pause, Display (for PlayListDialog) 
keys can not be used when teletext is ON. If a 
recording starts from timer when teletext is ON, 
teletext is automatically turned off. Also teletext usage 
is disabled when there is an ongoing recording or 
playback. 
Timeshift Recording 
Press   (PAUSE) button while watching a broadcast 
to activate timeshifting mode.In timeshifting mode, the 
programme is paused and simultaneously recorded 
to the connected USB disk. Press   (PLAY) button 
again to resume the paused programme from where 
you stopped. Press the STOP button to stop timeshift 
recording and return to the live broadcast.
Note: Timeshift cannot be used while in radio mode. 
Note : You cannot use the timeshift fast reverse 
feature before advancing the playback with the fast 
forward option.
Instant Recording
Press 
 (RECORD) button to start recording an 
event instantly while watching a programme. You can 
press 
 (RECORD) button on the remote control 
again to record the next event on the EPG. In this 
case, an OSD will be displayed, indicating the 
programmed events for recording. Press 
 (STOP) 
button to cancel instant recording. 
Note: You can not switch broadcasts or view the Media Browser 
during the recording mode. While recording a programme or 
during the timeshifting, a warning message appears on the 
screen if your USB device speed is not suffi cent.
Watching Recorded Programmes 
Select the Recordings Library from the Media 
Browse
r menu. Select a recorded item from the list (if 
previously recorded). Press the OK button to view the  
Play Options. Select an option then press OK button.
Note: Viewing main menu and menu items will not be available 
during the playback.
Press the 
 (STOP) button to stop a playback and 
return to the Recordings Library.
Slow Forward
If you press   (PAUSE) button while watching recorded 
programmes, the slow forward feature will be available. 
You can use 
 button to slow forward. Pressing 
 
button consecutively will change slow forwarding speed.
Recording Confi guration
Select the Recording Confi guration item in the 
Settings menu to confi gure the recording settings. 
Format Disk: You can use Format Disk feature 
for formatting the connected USB disk. Your pin is 
required to use the Format Disk feature (default pin 
is 0000). 
IMPORTANT: Note that ALL the data stored on the 
USB disk will be lost and the disk format will be 
converted to FAT32 if you activate this feature. If 
your USB disk malfunctions, you can try formatting 
the USB disk. In most cases formatting the USB disk 
will restore normal operation; however, ALL the data 
stored on the USB disk will be lost in such a case. 
Note:  If “USB is too slow” message is displayed on 
the screen while starting a recording, try restarting the 
recording. If you still get the same error, it is possible that 
your USB disk does not meet the speed requirements. Try 
connecting another USB disk.
Media Browser Menu
You can play photo, music, and movie fi les  stored 
on a USB disk by connecting it to your TV. Connect 
a USB disk to one of the USB inputs located on the 
side of the TV. Pressing the MENU button while in the 
Media Browser mode will access the Picture, Sound 
and Settings menu options. Pressing the MENU button 
again will exit from this screen.
 
You can set your Media 
Browser preferences by using the Settings Menu.
Loop/Shuffl e Mode Operation
Start playback with 
 and 
activate 
TV plays next file and loop 
the list.
Start playback with OK and 
activate 
the same fi le will be played in a 
loop (repeat).
Start playback with OK/  and 
activate 
the fi le will be played in a shuffl e.
01_[GB]_MB95S_4847UK_DVBT_C_24205LED_DVD_ROCKER_SILVER16_10081848_50232563_basic IB.indd   13
01_[GB]_MB95S_4847UK_DVBT_C_24205LED_DVD_ROCKER_SILVER16_10081848_50232563_basic IB.indd   13
27.08.2013   13:36:10
27.08.2013   13:36:10
Page of 32
Display

Click on the first or last page to see other LC-24DV250K (serv.man5) service manuals if exist.