LC-22DV240K - Sharp TV Parts Guide (repair manual). Page 10

Read Sharp LC-22DV240K Parts Guide online

10
LC-22DV240
LC-22DS240
 
Operation Manual (Continued)
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that 
1.
you subscribe to. For more information, see “Conditional Access” section.
USB Inputs. 
2.
Note that programme recording feature is available via these USB inputs. You can connect 
external hard disk drives to this input. 
Component Video Input (YPbPr)
3.
 is used for connecting component video.
You can connect the component video and audio sockets with a device that has 
component output. To do this, you must use the supplied component video connection 
cable for enabling connection. First, plug single jack of the cable to the TV’s YPbPr socket 
(side). Afterwards, insert your component cable’s (not supplied) connectors into the plural 
part of the Component video connection cable. Colours of the connected jacks should 
match.
Side audio-video connection
4.
 input is used for connecting video and audio signals of 
external devices. To make a video connection, you must use the supplied AV connection 
cable for enabling connection. First, plug singular jack of the cable to the TV’s Side AV 
socket. Afterwards, insert your video cable’s (not supplied) connector into the YELLOW 
input (located on the plural side) of the supplied AV connection cable. Colours of the 
connected jacks should match. 
To enable audio connection, you must use RED and WHITE inputs of the side AV 
connection cable. Afterwards, insert your device’s audio cable’s connectors into the RED 
and WHITE jack of the supplied side AV connection cable. Colours of the connected jacks should 
match.
Note: You should use audio inputs of side AV connection cable (RED & 
WHITE) to enable sound connection when connecting a device to your TV by 
using PC or COMPONENT VIDEO input.
Headphone jack is used for connecting an external headphone to the 
5.
system. Connect to the HEADPHONE jack to listen to the TV from 
headphones (optional).
Volume/ Programme/ Source and Standby-On switch
6.
7.
, switch is used for turning the TV on or off.
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50Hz.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the 
mains. Plug the power cable to the mains socket outlet.
Aerial Connection
Connect the aerial ,cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
SPDIF
SCART
VGA
Coax.OUT
1
Aerial  or  Cable
SIDE
 AV
YP
b
P
r
MODE
o
5Vdc 
Max:500mA
A01_MB62_[GB]_(01-TV)_1910UK_IDTV_TC_PVR_BRONZE19_22942LED_ROCKER_ZIGGO_10075860_50201267.indd 10
16.01.2012 14:13:49
Page of 82
Display

Click on the first or last page to see other LC-22DV240K service manuals if exist.