LC-20SD4E (serv.man7) - Sharp TV User Guide / Operation Manual. Page 8

Press a on the TV.

• The B indicator on the TV changes from red to green.

• If you are not going to use this TV for a long period of

time, be sure to remove the AC cord from the power outlet.

• In DTV input mode, if the power is turned off immediately

after a setting change from the menu screen, the new
setting or channel information may not be memorised.

When the TV powers on for the first time after purchase,
the initial auto installation is invoked. You can
automatically set language, country and channels in
successive operations.

• The initial auto installation functions only once. If the initial

auto installation is not completed, (ex: When menu screen
disappeared by not operating for a few minutes, when
the power shut down, etc.), try First Installation from the
Setup menu. (See page 13.)

• The initial auto installation can be stopped by pressing

MENU or EXIT.

Setting the on-screen display language

1 Press a/b/c/d to select the desired language

listed from “First installation(Language)”.

2 Press ENTER to enter the setting.

Setting your country or area

1 Press  a/b/c/d to select your country or area

listed from “First installation(Country)”.

2 Press ENTER to enter the setting.

Setting the Automatic search

1 Press a/b to select the colour system.
2 Press ENTER to enter the setting.
• The programme auto search starts at the same time.

You do not need to do anything during the auto search.

The setup menu disappears and you can watch the
programme on channel 1.

Press B on the remote control unit when the TV is
on.

• The TV enters standby mode and the image on the screen

disappears.

• The B indicator on the TV changes from green to red.
• You can turn the TV on by pressing B on the remote

control unit from standby mode.

• Weak electric power is still consumed even when B is

turned off.

• To completely turn off the TV, press a on the TV.

Off

Red

Green

Orange

Power off

The TV is in standby mode.

The TV is on.

The TV screen is off and a Timer event
has begun.

Although it only displays the tuning of the analogue
channel, it is actually tuning the digital channels at
the same time.

• Both analogue and digital channels are scanned at the

same time during “Automatic search” of the “First
installation”, and digital channel tuning is faster than
analogue tuning. If you want to operate the digital mode
first, press EXIT and then press DTV/TV.

• You can select a language from the Setup menu. Select

from 13 languages. (English, Spanish, German, French,
Italian, Swedish, Dutch, Russian, Portuguese, Turkish,
Greek, Finnish, Polish)

• You can select a country from the Setup menu. Select

from 13 countries. (United Kingdom, Spain, Germany,
France, Italy, Sweden, Netherlands, Russia, Portugal,
Turkey, Greece, Finland, Poland)
* If on the “First Installation(country)” screen “United

Kingdom” is selected, “Move To” cannot be used in U.K.

• If you want to reconfigure the country setting, for instance

after moving to another country, conduct “First installation”
from the Analogue Menu again.

• After “Auto Scan” is complete, carrier names are sorted

in the same order of the “Channel Sort Table List (TV,
Radio)”.

• Sorting is accomplished by checking whether the service

name correspond to the “Received Service Name” of the
“Channel Sort Table List”.

• Received carrier names are not changed to match the

“Short Service Name”.

• The channel position moves up, if the service is not found

after the “Auto Scan” is finished.

• A carrier that is not in the “Channel Sort Table List” will be

positioned at the bottom of the sorted list.

• If the same service name is duplicated, the tuner selects

the stronger signal, sorts it and places it in the list. The
weaker signal listing is placed at the bottom of the list.

• TV and Radio presetting is done separately so LCN

numbers are not duplicated between the two.