Read Sharp LC-19A1E (serv.man4) Service Manual online
LC-19A1E-BK/WH
4 – 20
<When EXT5 is used for external input> No picture on the display (7)
No EXT5 (PC- terminal) output of the external input system.
Checklist:
1) Is “INPUT SOURCE” button
on the remote control set up correctly?
• • • Set it as “EXT5” with the INPUT SOURCE button on the remote
control.
2) Connect the commercial PC-Cable to the PC terminal of an external device.
• • • See the operation manual.
3) Is PC-Connector disconnected or connected improperly?
• • • Connect it correctly as per the operation manual.
YES
Is “EXT5” selected with
button on the remote control?
NO
Select “EXT5” with
button on the remote control.
YES
Is ANALOG-RGB signal (PC_R/G/B) sent to pins (1), (2) and (3)
of EXT5-TERMINAL (SC401)?
of EXT5-TERMINAL (SC401)?
NO
Check PC-cable and external connection.
YES
Is ANALOG-RGB signal (PC_R/G/B) sent to pins (T1), (V1) and
(M1) of IC801 (DVP-M2)?
(M1) of IC801 (DVP-M2)?
NO
Check EXT5-TERMINAL and peripheral circuits.
YES
Is LVDS video signal (RA
±-RD±) output from pins (P22) (P23)-
(V22) (V23) of IC801 (DVP-M2), and is RCLK signal (RCLK
±)
output from pins (U22)/(U23)?
NO
Check pins (R19) (D5) of B3.3V line of IC801 (DVP-M2), pins
(D12) of B1.5V line, pins (B6) (A6) of SDA1/SCL1 line and
peripheral circuits.
(D12) of B1.5V line, pins (B6) (A6) of SDA1/SCL1 line and
peripheral circuits.
YES
Is RSDS-R/G/B signal (R [0:2]
±, G [0:2]±,B [0:2]±) output to pins
(53)-(72) of IC9201 (RSDS-TRANSMITTER), and is CLK signal
(CK
(CK
±) output to pins (60) and (59)?
NO
Check pins (1) and (9) of B3.3V line of IC9201 (RSDS-TRANS-
MITTER), short circuits and peripheral circuits.
MITTER), short circuits and peripheral circuits.
YES
Is RSDS-R/G/B signal (R [0:2]
±, G [0:2]±, B [0:2]± and CLK sig-
nal (CK
±) input to CONNECTOR SC9201 of LCD-PANEL?
(RSDS-R signal: 22-27pin, RSDS-G signal: 57-62pin, RSDS-B
signal: 66-71pin, CK
signal: 66-71pin, CK
± signal: 33/32pin)
NO
Check whether there is short-circuit at CONNECTOR SC9201 of
LCD-PANEL and also check peripheral circuits.
LCD-PANEL and also check peripheral circuits.
YES
Is liquid crystal drive power supply input to CONNECTOR
SC9201 of LCD-PANEL?
(VLS-B12V=40/41/42pin, VGH=5/6pin,VGL=2/3pin, COM-
BIAS=75/76/77pin)
SC9201 of LCD-PANEL?
(VLS-B12V=40/41/42pin, VGH=5/6pin,VGL=2/3pin, COM-
BIAS=75/76/77pin)
NO
Please check REGULATOR-circuit of a defective voltage respec-
tively.
tively.
YES
Replace LCD-PANEL.
Click on the first or last page to see other LC-19A1E (serv.man4) service manuals if exist.