Read Sharp LC-19A1E (serv.man4) Service Manual online
LC-19A1E-BK/WH
4 – 12
<During external connection> No picture on the external monitor (2)
SCART1:
No picture appears on EXT1 -connected monitor during the tuner
(U/V) reception.
Checklist:
1) Are input terminal on back of TV and “INPUT SOURCE” button
on the remote control set up correctly?
• • • See the operation manual and
set “INPUT SOURCE” appropriately.
2) Is SCART-CABLE disconnected or connected improperly?
• • • Connect it correctly as per the operation manual.
3) When the monitor picture is not sent and is not displayed on the monitor, refer to “No picture” for each terminal.
Is video signal output to pin (19) of SCART1 (SC501)?
YES
Check SCART1, external connection or input setting.
NO
Is video signal (SCART-OUT) output from pin (22) of IC501 (AV-
SW)?
SW)?
YES
Check SCART1 (SC501) and peripheral circuits.
NO
Is video signal (VIDEO) output from pin (17) of TUNER (TU501)?
YES
Check pin (38) of B9V power supply of IC501, 12C-line pins (28)
and (29) and peripheral circuits.
and (29) and peripheral circuits.
NO
Check B5V power supply pins (3), 12C-line pins (11) and (10) of
tuner (TU501) and peripheral circuits.
tuner (TU501) and peripheral circuits.
Click on the first or last page to see other LC-19A1E (serv.man4) service manuals if exist.