Read Sharp LC-12A2E (serv.man8) User Guide / Operation Manual online
Presetting the Channels (MANUAL) (Continued)
4
Press
VOL (+)/(–)
to locate the station you want to
preset to the channel.
A search is initiated and when a TV signal is
received during the search, the search stops.
received during the search, the search stops.
5
Repeat steps
3
and
4
above to preset the channel
numbers for other stations.
6
Press
MENU
until the normal screen appears.
■
In a weak reception area, or under bad reception conditions
1
Press
MENU
on the main unit for more than
2 seconds.
The AUTO mode screen appears.
2
Press
MENU
until the MANUAL mode screen
appears.
3
While the MANUAL mode screen is displayed,
press
press
MENU
for more than 2 seconds to display
the FINE mode screen.
The channel number remains in green.
4
Adjust for good reception with
VOL (+)/(–)
.
5
After finishing the adjustment, press
MENU
to
continue channel presetting.
FINE
UHF 5
625.50MHz
UHF 5
625.50MHz
TINS-XXXXCEZZ
MANUAL( )
VHF 5
107.50MHz
VHF 5
107.50MHz
3
Select the channel number with
CHANNEL
SELECT
or
CH (
L
)/(
M
)
.
Channel number
Web-site: www.sharp.co.uk/support Help Line (office hours only): 0990-274277
VOL
(+)/(–)
Rear control panel
of main unit
MENU
LC-12A2EGuide
00.8.5, 5:18 PM
4