Read Sharp LC-12A2E (serv.man2) Service Manual online
LC-12A2E
6
DISASSEMBLY OF THE SET
1. Insert your finger into the center of the terminal cover
and pull it toward you to detach the terminal cover.
2. Remove the four screws
1
and one screw
2
.
3. Open the cabinet B by approx. 45˚ from the bottom
of the cabinet (stand side).
4. Remove the lead wire from the cable clamp
3
.
5. Remove the power connector
4
.
6. Remove the connector
5
from the light reception
unit.
7. Remove the lead wire from the cable clamp
6
.
8. Remove the speaker connector
7
.
9. Remove the FFC from the FFC connector
8
on the
main PWB.
10. Remove the connector
9
from the ir unit.
11. Remove the connector
0
from the switch PWB.
12. Remove the right and left speaker connectors
q
on the terminal PWB.
<<Disassembly of the main PWB>>
1. Disconnect the flexible cable connectors
1. Disconnect the flexible cable connectors
w
and
e
from the LCD panel.
2. Disconnect the cable connectors
r
and
t
from
the fluorescent lamp.
3. Remove the four screws
y
.
<<Disassembly of the terminal PWB>>
1. Remove the cover
1. Remove the cover
i
.
2. Remove the five screws
u
.
3. Remove the two screws
o
. Take them out of the
cabinet holes.
<<Cabinet A side>>
<<Cabinet B side>>
Cabinet A GCABA2401CEKB
Terminal Cover GCOVA1855CEKB
Hinge Cover GCOVA1853CESA
Rotation Cover GCOVA1854CESA
Rotation Cover GCOVA1854CESA
Cabinet B GCABB2295CEKA
Click on the first or last page to see other LC-12A2E (serv.man2) service manuals if exist.