66DW-18H (serv.man35). Fitting instructions for Thomson CRT - Sharp TV Technical Bulletin (repair manual). Page 2

Sharp Electronics (UK) Limited

Originator AvW   Supervisor                        Approval Date    /   /     Reference SP84001X

Revision 2

White – Carry out as required, Yellow – Carry out as required and whenever the unit comes in for service, Red – Carry out on all units

Month of Issue:    January 1999

        Classification:                   White

Page 2 of 3

To change the deflection yoke wiring from a Philips CRT to a Thomson CRT, proceed as
follows.

1.  Unsolder the red and orange FH leads from the deflection yoke.
2.  Remove connector 1 from the yellow and green leads.
3.  Strip the yellow and green wires of insulation (about 4mm).
4.  Solder the red and orange (FH) leads as shown above.
5.  Solder the yellow and green (FV) leads as shown above.
6. Replace 

lead 

KC 

(QCNW-2757BMZZ) connects the CRT socket to the neck of the CRT

with QCNW-2775BMZZ type.

FV

FH

KC lead