Read Sharp 37DT-25H (serv.man20) Technical Bulletin online
Sharp Electronics (UK) Limited
Originator AvW Supervisor Approval Date / / Reference GE82507X
White – Carry out as required, Yellow – Carry out as required and whenever the unit comes in for service, Red – Carry out on all units
CTV980810
Month of Issue: August 1998
Classification: White
TELEVISION TECHNICAL BULLETIN
Page 1 of 2
MODELS
37DM23H
37DT25H
51DT25H
SYMPTOM During standby, intermittent noise may be heard from the SCART socket, if it is
connected to an external amplifier.
ACTION
Carry out the following circuit change if required.
1.
Solder a 180R resistor in series with a 1N4148 diode as shown below.
2.
Solder 90mm wire to end of resistor as shown below.
3.
Put above into vynil tube.
4.
Connect the anode of the diode to base of Q345 and the wire to the collector of
Q1007 as shown on page 2.
Q1007 as shown on page 2.
5.
Fix components into place with use of glue.
REF NO
DESCRIPTION
PART NUMBER
PRICE CODE
DA-1
Didoe, 1N4148
RH-DX0045BMZZ
AA
RA-1
Resistor, 180R 0.5W
VRD-RA2HD181J
AA
WI-1
Wire 90mm
VW7UGB0-090AA
AA
UL-1
Tube
VT-UL0020T030
AA
Solder the 180R resistor to
the diode and l wire as
shown
the diode and l wire as
shown
SOLDER JOIN
DA-1 RA-1 WI-1
Put DA-1, RA-1 and WI-1
into a protective tube
into a protective tube
Protective tube (A-1 unit)
Sharp Electronics (UK) Limited
Originator AvW Supervisor Approval Date / / Reference GE82507X
White – Carry out as required, Yellow – Carry out as required and whenever the unit comes in for service, Red – Carry out on all units
CTV980810
Month of Issue: August 1998
Classification: White
TELEVISION TECHNICAL BULLETIN
Page 2 of 2
Q1007 D301
RA-1
IC201 DI-1
8
Q355
R209 Q354
8
Q355
R209 Q354
Mother PWB (F7213BM) print side
Solder the A1 unit
from the collector
of Q1007 to the
base Q354.
from the collector
of Q1007 to the
base Q354.
Fix the A1 unit to
the PWB with a
drop of adhesive
glue.
the PWB with a
drop of adhesive
glue.
Details of Circuit and Physical Location of Components
Q1007
Q354
C
E
A1 UNIT
ADHESIVE DROP
Display