Read Sharp 21LF-90H (serv.man4) User Guide / Operation Manual online
- 9 -
3. Replace the battery cover.
Notes:
Remove batteries if weak or if the unit is not
Remove batteries if weak or if the unit is not
in use for long periods.
Do not mix old and new batteries.
Incorrect installation of the batteries may
Incorrect installation of the batteries may
damage the remote control.
Switching the TV ON/OFF
You can operate your TV both using the
remote control handset and onset but-
tons.
To switch the TV on
Your TV will switch on in two steps:
1- Press the power button located on the front
1- Press the power button located on the front
of the TV. Then the TV switches itself to
standby mode and the RED LED located
below the TV turns on.
2- To switch on the TV from stand-by mode
either:
Press a digit button on the remote control so
that a programme number is selected,
or,
Press Power button and CH or CH
or,
Press Power button and CH or CH
buttons on the TV or -P/CH or P/CH+ but-
tons on the remote control respectively, so
the TV will switch on and the RED Led will
turn GREEN.
To switch the TV off
Press the stand-by button on the remote
control, so the TV will switch to stand-by
mode and the GREEN LED will become
RED,
or,
Press the power button located on the front
Press the power button located on the front
of the TV.
Initial Settings
The message PLEASE CHECK ANTENNA
CABLE AUTO. PROGRAMMING SYSTEM will
be displayed when you turn on your TV for
the first time.
Note: If you connect Video Recorder to your TV
Note: If you connect Video Recorder to your TV
via antenna input (ANT socket); to tune the
VCR channel automatically you must set the
VCR in play mode before you start APS.
To cancel APS before starting, press
79
button.
1- Select LANGUAGE with or
button, then press the or but-
ton to select a menu language.
2- Select COUNTRY with or
button, then press the or but-
ton to select the correct country.
? : OTHERN : NORWAY
D : GERMANY SF : FINLAND
A : AUSTRIA
D : GERMANY SF : FINLAND
A : AUSTRIA
UK : UNITED KINGDOM
CH : SWITZERLAND NL :NETHERLANDS
I : ITALY
I : ITALY
P : PORTUGAL
F : FRANCE
E : SPAIN
B : BELGIUM TR : TURKEY
DK : DENMARK EIR: IRELAND
S : SWEDEN
3- Press the or buttons to
DK : DENMARK EIR: IRELAND
S : SWEDEN
3- Press the or buttons to
select
STANDARD
. This, will effect
the sort process in APS.
4- Select START with or but-
ton, then press the button to start
A.P.S.
A.P.S., (Automatic Programming System)
automatically programmes the received
channels in your TVs programme numbers.
During A.P.S.,
A.P.S. IS RUNNING
will be
displayed. After A.P.S. is finalized, the PRO-
GRAM. menu appears.
ENG-2163-1548 UK-PAL-TEK SCART-FAV-STEREO-SHARP-AK44-TV1.p65
06.01.2004, 15:37
9
Click on the first or last page to see other 21LF-90H (serv.man4) service manuals if exist.