Read Sharp 15FS-25H Specification online
MX-2300/2700 N/G SIMULATION 7 – 9
3. Details of simulation
1
1-1
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the scan-
ner unit and its control circuit.
Section
Optical (Image scanning)
Item
Operation
Operation/Procedure
1) Select the operation mode with the buttons on the touch panel.
2) Select the magnification ratio with [ZOOM] button on the touch
1) Select the operation mode with the buttons on the touch panel.
2) Select the magnification ratio with [ZOOM] button on the touch
panel.
3) Press [EXECUTE] button.
The scanner scans at the speed corresponding to the opera-
tion mode.
tion mode.
1-2
Purpose
Operation test/check
Function (Purpose) Used to check the operation of sensor and
detector in the scanning (read) section and
the related circuit.
the related circuit.
Section
Optical (Image scanning)
Item
Operation
Operation/Procedure
The sensor and detector operation conditions are displayed.
The active sensors and detectors are highlighted.
• The scanner (read) unit is in the home position.: "MHPS" section
The sensor and detector operation conditions are displayed.
The active sensors and detectors are highlighted.
• The scanner (read) unit is in the home position.: "MHPS" section
is highlighted.
• The scanner (read) unit is not in the home position.: "MHPS" is
normally displayed.
1-5
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the scan-
ner unit.
Section
Optical (Image scanning)
Item
Operation
Operation/Procedure
1)
1)
Select the operation mode with the buttons on the touch panel.
2)
Select the magnification ratio with [ZOOM] button on the touch
panel.
panel.
3)
Press [EXECUTE] button.
The scanner scans continuously at the speed corresponding to
the operation mode.
When [EXECUTE] button is pressed, the operation is termi-
nated.
The scanner scans continuously at the speed corresponding to
the operation mode.
When [EXECUTE] button is pressed, the operation is termi-
nated.
2
2-1
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the auto-
matic document feeder unit and the control
circuit.
circuit.
Section
RSPF
Item
Operation
Operation/Procedure
1)
1)
Select the operation mode with the buttons on the touch panel.
2)
Select the aging mode with [1SIDE] and [2SIDE] buttons on
the touch panel.
the touch panel.
3)
Select the magnification ratio with [ZOOM] button on the touch
panel.
panel.
4)
Press [EXECUTE] button.
Aging is performed in the mode corresponding to the operation
mode.
* When [EXECUTE] button is pressed during aging, the oper-
Aging is performed in the mode corresponding to the operation
mode.
* When [EXECUTE] button is pressed during aging, the oper-
ation is terminated and [EXECUTE] button returns to the
original state.
original state.
Button
display
Content
Selectable
magnification ratios
Default
value
50
Scan magnification ratio:
50%
50%
COLOR: 50%, 100%,
200%
BLACK (High speed):
100%, 200%
BLACK (Low speed):
50%, 100%, 200%
200%
BLACK (High speed):
100%, 200%
BLACK (Low speed):
50%, 100%, 200%
100%
100
Scan magnification ratio:
100%
100%
200
Scan magnification ratio:
200%
200%
CLOSE
BLACK(SLOW)
0
SIMULATION NO.01-01
SCANNER CHECK
TEST
EXECUTE
150
200
ZOOM
100
%
BLACK(FAST)
COLOR
25
50
100
300
400
0
SI MU LA TI O N N O. 0 1㧙02
TEST
SCANNER SENSOR CHE CK
MHPS
1/1
CLOSE
Button
display
Content
Selectable
magnification ratio
Default
value
50
Scan magnification ratio:
50%
50%
COLOR: 50%, 100%,
200%
BLACK (High speed):
100%, 200%
BLACK (Low speed):
50%, 100%, 200%
200%
BLACK (High speed):
100%, 200%
BLACK (Low speed):
50%, 100%, 200%
100%
100
Scan magnification ratio:
100%
100%
200
Scan magnification ratio:
200%
200%
CLOSE
BLACK(SLOW)
0
SIMULATION NO.01-05
SCANNER CHECK
TEST
EXECUTE
150
200
ZOOM
100
%
BLACK(FAST)
COLOR
25
50
100
300
400
Click on the first or last page to see other 15FS-25H service manuals if exist.