XV-Z91E (serv.man27). Setup and connections - Sharp Projector User Guide / Operation Manual. Page 12

• Place a translucent screen between the projector and

the audience.

• Use the projector’s menu screen to reverse the

projected image. (See page 42 for use of this
function.)

• Optimal image quality can be achieved when the projector

is positioned perpendicular to the screen with all feet flat
and leveled.

• When the distance between the projector and a

screen is not sufficient for normal rear projection, you
can use a mirror to reflect the image onto the screen.

• Place a mirror (normal flat type) in front of the lens.
• Project the normal image onto the mirror.
• The image reflected from the mirror is projected onto

the translucent screen.

• When using a mirror, be sure to carefully position both the

projector and the mirror so the light does not shine into the
eyes of the audience.

• It is recommended that you use the optional Sharp

ceiling-mount bracket for this installation.

• Before mounting the projector, remove the Swivel

Stand. (See page 17 for removing and attaching the
Swivel Stand.)

• Before mounting the projector, contact your nearest

Sharp Authorised Projector Dealer or Service Centre
to obtain the recommended ceiling-mount bracket
(sold separately). (AN-TK202 ceiling-mount bracket,
AN-TK201 extension tube, AN-60KT ceiling adaptors
for AN-TK202 or AN-TK201)

• When the projector is in the inverted position, use the

upper edge of the screen as the base line.

• Use the projector’s menu screen to select the

appropriate projection mode. (See page 42 for use
of this function.)