Read Sharp XV-Z9000E (serv.man18) User Guide / Operation Manual online
23
T
roub
leshooting
Troubleshooting
“Gamma Correction” is not operating properly
H
Reconnect the RS-232C serial cable and try again.
The cable may not be connected properly or an error may have
occurred during the transmission.
The cable may not be connected properly or an error may have
occurred during the transmission.
H
Check that the port for serial (RS-232C) communications is correctly
specified in the PC’s settings
specified in the PC’s settings
(page 17)
.
H
Projector may not be receiving command because of the projector’s
setting. Please check the projector’s “ON/OFF” status, “INPUT
SELECT”
setting. Please check the projector’s “ON/OFF” status, “INPUT
SELECT”
status (COMPUTER, VIDEO) or the input signal. Resend
the command after adjusting these items.
H
Before Gamma Correction, use the projector’s Gamma button and
set the CUSTOM mode.
set the CUSTOM mode.
Click on the first or last page to see other XV-Z9000E (serv.man18) service manuals if exist.