Read Sharp XV-Z9000E (serv.man18) User Guide / Operation Manual online
18
Adjusting Images
Gamma Correction
Changing the
gamma
value adjusts the tone of an image on the screen.
Before Adjusting
●
Use the projector’s Gamma button and set the CUSTOM mode.
●
Please connect a serial cable to the projector and the PC, then
proceed to
proceed to
Gamma Correction
.
The
“SharpVision Manager”
window appears automatically after the
Opening Image.
1
Specify the source of the image. The default setting is
“VIDEO”
.
2
Each of these colours except
“WHITE”
can be adjusted
respectively. As you adjust
“WHITE”,
the values of the other three
colours will be offset.
The
“Reset & Transmit”
button resets the values of the colour
currently selected. If you want to reset both the red and green
values, click the
values, click the
“Reset & Transmit”
button in the
“RED”
mode,
and then click the
“Reset & Transmit”
button again in the
“GREEN”
mode. If you want to reset to the original values, click
the
“Reset & Transmit”
button in the
“WHITE”
mode.
3
To restore to the previous status after operating the gamma data.
4
To restore the status before the “UNDO” button was clicked.
5
To send all the adjustment signals to the projector
6
Gamma coordinate display (INPUT/OUTPUT)
2
6
5
3
4
4
1
Click on the first or last page to see other XV-Z9000E (serv.man18) service manuals if exist.