Read Sharp XV-Z7000 (serv.man5) Service Manual online
36
XV-Z7000U/E
AN-Z7T
YES
YES
YES
YES
YES
Checking the lamp
light-up
Turn on the power switch.
Is discharge sound heard
from the lamp?
Is discharge sound heard
from the lamp?
Insert the BA harness
tightly. Or replace it as
required.
tightly. Or replace it as
required.
Go to "Checking the
power unit".
power unit".
Replace the ballast unit.
NO
Go to "Checking the
microcomputer
peripherals".
microcomputer
peripherals".
NO
NO
Are DC260-400V voltages
applied between the pins
of PL connector?
applied between the pins
of PL connector?
NO
Replace the lamp.
NO
Is the lamp socket
disconnected?
disconnected?
Reconnect the lamp
socket tightly.
socket tightly.
Is the BA harness tightly
inserted? Is the harness
broken?
inserted? Is the harness
broken?
Is voltage of over 1V
applied between pins (1)
and (2) of BA harness?
applied between pins (1)
and (2) of BA harness?
YES
YES
YES
NO
Checking the PLL circuit
Is there 120MHz clock
output at pin (8) of
IC8001?
output at pin (8) of
IC8001?
IC8001 or its peripheral
circuit defective.
circuit defective.
End
NO
Is there 40MHz clock
output at pin (9) of
IC8001?
output at pin (9) of
IC8001?
NO
Is there 16MHz or so
clock output at pin (7) of
IC8001?
clock output at pin (7) of
IC8001?
Click on the first or last page to see other XV-Z7000 (serv.man5) service manuals if exist.